|
| Support > OpenBSD information > Server compatibility list
For an explanation of the list below and the usual disclaimer please read the server testing information.
Contributions, comments or questions to the OSCL: e-mail openbsd _at_ armorlogic.com
| Back to overview | | Hardware configuration: | Dell PowerEdge 1950 | | OpenBSD version tested: | 4.5 | | OpenBSD support: | Full | | Disk system: | SCSI/RAID | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install. | | Availability: | Available | | Last changed: | April 27, 2010, 8:04 am | dmesg: OpenBSD 4.5-stable (GENERIC.MP) #4: Wed May 13 22:25:55 CEST 2009
root@i386.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
real mem = 3484319744 (3322MB)
avail mem = 3379597312 (3223MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/20/09, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.5
@ 0xcfb9c000 (67 entries)
bios0: vendor Dell Inc. version "2.6.1" date 04/20/2009
bios0: Dell Inc. PowerEdge 1950
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu4:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu5 at mainbus0: apid 5 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu5:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu6 at mainbus0: apid 3 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu6:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu7:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0: apid 9 pa 0xfec81000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (PEX2)
acpiprt2 at acpi0: bus 7 (UPST)
acpiprt3 at acpi0: bus 8 (DWN1)
acpiprt4 at acpi0: bus 10 (DWN2)
acpiprt5 at acpi0: bus 1 (PEX3)
acpiprt6 at acpi0: bus 2 (PE2P)
acpiprt7 at acpi0: bus 12 (PEX4)
acpiprt8 at acpi0: bus 14 (PEX6)
acpiprt9 at acpi0: bus 4 (SBEX)
acpiprt10 at acpi0: bus 16 (COMP)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpicpu4 at acpi0
acpicpu5 at acpi0
acpicpu6 at acpi0
acpicpu7 at acpi0
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00 0xcc000/0x5200
0xd1800/0x1000! 0xec000/0x4000!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 6
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 7
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 8
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 9
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16 (irq 5)
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 10
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 11
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci8 at ppb7 bus 2
mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 9 int 14 (irq 6),
0x1f031028
mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM
scsibus0 at mfi0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.03> SCSI3 0/direct fixed
sd0: 69376MB, 512 bytes/sec, 142082048 sec total
ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci9 at ppb8 bus 3
ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 8 int 16 (irq 0)
pci10 at ppb9 bus 12
em0 at pci10 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 8 int 16 (irq
5), address 00:15:17:7d:20:42
em1 at pci10 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 8 int 17 (irq
11), address 00:15:17:7d:20:43
ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 8 int 16 (irq 0)
pci12 at ppb11 bus 14
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci13 at ppb12 bus 15
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci14 at ppb13 bus 4
ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci15 at ppb14 bus 5
bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16 (irq 5)
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8 int 21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8 int 20 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8 int 21 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8 int 21 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb15 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci16 at ppb15 bus 16
vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 8 int 19 (irq 10)
drm0 at radeondrm0
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub4 at uhub0 port 1 "Dell product 0xa001" rev 2.00/0.00 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Dell DRAC5" rev 1.10/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Dell DRAC5" rev 1.10/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
umass0 at uhub4 port 2 configuration 1 interface 0 "DELL INC. DRAC5 VIRTUAL MEDIA" rev
2.00/0.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd1 at scsibus2 targ 1 lun 0: <Dell, Virtual CDROM, 123> SCSI0 5/cdrom removable
umass1 at uhub4 port 2 configuration 1 interface 1 "DELL INC. DRAC5 VIRTUAL MEDIA" rev
2.00/0.00 addr 4
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <Dell, Virtual Floppy, 123> SCSI0 0/direct removable
sd1: drive offline
uhub5 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 5
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
bnx0: address 00:19:b9:e0:68:8c
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx1: address 00:19:b9:e0:68:8a
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
OpenBSD 4.4-stable (GENERIC.MP) #3: Fri Nov 7 09:03:28 CET 2008
root@i386.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
real mem = 3484319744 (3322MB)
avail mem = 3380097024 (3223MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/29/08, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.5
@ 0xcfb9c000 (67 entries)
bios0: vendor Dell Inc. version "2.3.1" date 04/29/2008
bios0: Dell Inc. PowerEdge 1950
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu4:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu5 at mainbus0: apid 5 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu5:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu6 at mainbus0: apid 3 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu6:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu7:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (PEX2)
acpiprt2 at acpi0: bus 5 (UPST)
acpiprt3 at acpi0: bus 6 (DWN1)
acpiprt4 at acpi0: bus 8 (DWN2)
acpiprt5 at acpi0: bus 1 (PEX3)
acpiprt6 at acpi0: bus 0 (PE2P)
acpiprt6: no apic found for irq 64
acpiprt6: no apic found for irq 65
acpiprt6: no apic found for irq 78
acpiprt7 at acpi0: bus 10 (PEX4)
acpiprt8 at acpi0: bus 12 (PEX6)
acpiprt9 at acpi0: bus 2 (SBEX)
acpiprt10 at acpi0: bus 14 (COMP)
acpicpu0 at acpi0: C3
acpicpu1 at acpi0: C3
acpicpu2 at acpi0: C3
acpicpu3 at acpi0: C3
acpicpu4 at acpi0: C3
acpicpu5 at acpi0: C3
acpicpu6 at acpi0: C3
acpicpu7 at acpi0: C3
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1e00 0xcc000/0x5e00
0xd2000/0x1000! 0xec000/0x4000!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16 (irq 5)
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 8
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 9
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic 8 int 16 (irq 5),
Dell PERC 6/i integrated
mfi0: logical drives 1, version 6.0.3-0002, 256MB RAM
scsibus0 at mfi0: 1 targets, initiator 64
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 6/i, 1.11> SCSI3 0/direct fixed
sd0: 69376MB, 8844 cyl, 255 head, 63 sec, 512 bytes/sec, 142082048 sec total
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 8 int 16 (irq 0)
pci8 at ppb7 bus 10
em0 at pci8 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 8 int 16 (irq
5), address 00:15:17:8c:91:1e
em1 at pci8 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 8 int 17 (irq
11), address 00:15:17:8c:91:1f
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 11
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 8 int 16 (irq 0)
pci10 at ppb9 bus 12
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 2
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 3
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16 (irq 5)
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8 int 21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8 int 20 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8 int 21 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 8 int 20 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8 int 21 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 14
vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCT10N, A105> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub5 at uhub0 port 1 "Dell product 0xa001" rev 2.00/0.00 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Dell DRAC5" rev 1.10/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Dell DRAC5" rev 1.10/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
umass0 at uhub5 port 2 configuration 1 interface 0 "DELL INC. DRAC5 VIRTUAL MEDIA" rev
2.00/0.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd1 at scsibus2 targ 1 lun 0: <Dell, Virtual CDROM, 123> SCSI0 5/cdrom removable
umass1 at uhub5 port 2 configuration 1 interface 1 "DELL INC. DRAC5 VIRTUAL MEDIA" rev
2.00/0.00 addr 4
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <Dell, Virtual Floppy, 123> SCSI0 0/direct removable
sd1: drive offline
umass2 at uhub5 port 2 configuration 1 interface 2 "DELL INC. DRAC5 VIRTUAL MEDIA" rev
2.00/0.00 addr 4
umass2: using SCSI over Bulk-Only
scsibus4 at umass2: 2 targets, initiator 0
sd2 at scsibus4 targ 1 lun 0: <Dell, Virtual Flash, 123> SCSI0 0/direct removable
sd2: 16MB, 2 cyl, 255 head, 63 sec, 512 bytes/sec, 32768 sec total
uhub6 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 5
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx1: address 00:21:9b:8a:01:8b
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:21:9b:8a:01:8d
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
OpenBSD 4.3-stable (GENERIC.MP) #3: Sun Aug 31 05:53:40 CEST 2008
root@i386.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
real mem = 2142142464 (2042MB)
avail mem = 2062581760 (1967MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/05/08, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.5
@ 0x7fb9c000 (66 entries)
bios0: vendor Dell Inc. version "2.2.6" date 02/05/2008
bios0: Dell Inc. PowerEdge 1950
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (PEX2)
acpiprt2 at acpi0: bus 5 (UPST)
acpiprt3 at acpi0: bus 6 (DWN1)
acpiprt4 at acpi0: bus 8 (DWN2)
acpiprt5 at acpi0: bus 1 (PEX3)
acpiprt6 at acpi0: bus 0 (PE2P)
acpiprt6: no apic found for irq 64
acpiprt6: no apic found for irq 65
acpiprt6: no apic found for irq 78
acpiprt7 at acpi0: bus 10 (PEX4)
acpiprt8 at acpi0: bus 12 (PEX6)
acpiprt9 at acpi0: bus 2 (SBEX)
acpiprt10 at acpi0: bus 14 (COMP)
acpicpu0 at acpi0: C3
acpicpu1 at acpi0: C3
acpicpu2 at acpi0: C3
acpicpu3 at acpi0: C3
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x5c00 0xd0000/0x1e00
0xec000/0x4000!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16 (irq 6)
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 8
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 9
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
mpi0 at pci7 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic 4 int 16 (irq 6)
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 75340MB, 75340 cyl, 16 head, 128 sec, 512 bytes/sec, 154296320 sec total
ses0 at scsibus0 targ 8 lun 0: <DP, BACKPLANE, 1.05> SCSI3 13/enclosure services fixed
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 4 int 16 (irq 0)
pci8 at ppb7 bus 10
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 11
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 4 int 16 (irq 0)
pci10 at ppb9 bus 12
bge0 at pci10 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0 (0xa200): apic 4
int 16 (irq 6), address 00:10:18:2f:db:e4
brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 2
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 3
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16 (irq 6)
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 int 21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 int 20 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 int 21 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 4 int 20 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 4 int 21 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 14
vga1 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CDRWDVD TSL462D, DE07> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
mtrr: Pentium Pro MTRR support
uhub5 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "CHESEN PS2 to USB Converter" rev
1.10/0.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "CHESEN PS2 to USB Converter" rev
1.10/0.10 addr 2
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx1: address 00:1e:c9:b0:7c:f9
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1e:c9:b0:7c:fb
brgphy2 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6 |
| Back to overview | | Hardware configuration: | Dell PowerEdge 2950 | | OpenBSD version tested: | 4.0-STABLE | | OpenBSD support: | Full | | Disk system: | SCSI/SAS | | Notes (OpenBSD): | System below is a Dell PowerEdge 2950 w/ PERC5i. Everything working,
lots of sensors and you can check raid status with bioctl. This is
quad-core server with GENERIC.MP.
Information provided by Alejandro Lozanoff alozanoff at corest dot com | | Availability: | Available | | Last changed: | February 28, 2007, 4:26 pm | dmesg: OpenBSD 4.0-stable (GENERIC.MP) #1: Wed Jan 10 22:11:33 GMT 2007
root@obsd40:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16
real mem = 3488874496 (3407104K)
avail mem = 3193712640 (3118860K)
using 4256 buffers containing 174546944 bytes (170456K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/18/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev.
2.4 @ 0xcffbc000 (62 entries)
bios0: Dell Inc. PowerEdge 2950
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfada0/384 (22 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev 0x00)
pcibios0: PCI bus #16 is the last bus
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1800 0xcb800/0x5200
0xec000/0x4000!
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01B2 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown Core FSB_FREQ value 0 (0xc188149f)
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16
cpu2 at mainbus0: apid 3 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16
cpu3 at mainbus0: apid 1 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5310 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 11 is type PCI
mainbus0: bus 12 is type PCI
mainbus0: bus 13 is type PCI
mainbus0: bus 14 is type PCI
mainbus0: bus 15 is type PCI
mainbus0: bus 16 is type PCI
mainbus0: bus 17 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
ioapic1 at mainbus0: apid 5 pa 0xfec81000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 5
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 6
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 7
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 8
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 9
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16 (irq 11),
address 00:18:8b:4e:49:97
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 10
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 11
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci8 at ppb7 bus 2
mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 5 int 14 (irq 5)
mfi0: logical drives 1, version 5.0.2-0003, 256MB RAM
scsibus0 at mfi0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.00> SCSI3 0/direct fixed
sd0: 278784MB, 278784 cyl, 64 head, 32 sec, 512 bytes/sec, 570949632 sec total
ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci9 at ppb8 bus 3
ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12
pci10 at ppb9 bus 12
ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12
pci12 at ppb11 bus 14
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci13 at ppb12 bus 15
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci14 at ppb13 bus 4
ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci15 at ppb14 bus 5
bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16 (irq 11),
address 00:18:8b:4e:49:95
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 int 21 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 int 20 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 int 21 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 4 int 21 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb15 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci16 at ppb15 bus 16
vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub4 at uhub3 port 5
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0-stable (GENERIC) #4: Wed Jan 10 21:58:46 GMT 2007
root@obsd40:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16
cpu0: unknown Core FSB_FREQ value 0 (0xc188149f)
real mem = 2146697216 (2096384K)
avail mem = 1950093312 (1904388K)
using 4256 buffers containing 107438080 bytes (104920K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/18/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev.
2.4 @ 0x7ffbc000 (62 entries)
bios0: Dell Inc. PowerEdge 2950
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfada0/384 (22 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev 0x00)
pcibios0: PCI bus #16 is the last bus
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x1000 0xca000/0x1800 0xcb800/0x5200
0xec000/0x4000!
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 6
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 7
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 8
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci4 at ppb3 bus 9
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x11: irq 11, address
00:18:8b:48:8a:ea
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 5
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 10
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 11
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci8 at ppb7 bus 2
mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: irq 5
mfi0: logical drives 1, version 5.0.2-0003, 256MB RAM
scsibus0 at mfi0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.00> SCSI3 0/direct fixed
sd0: 571136MB, 571136 cyl, 64 head, 32 sec, 512 bytes/sec, 1169686528 sec total
ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci9 at ppb8 bus 3
ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12
pci10 at ppb9 bus 12
ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12
pci12 at ppb11 bus 14
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci13 at ppb12 bus 15
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci14 at ppb13 bus 4
ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci15 at ppb14 bus 5
bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x11: irq 11, address
00:18:8b:48:8a:e8
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 5
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb15 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci16 at ppb15 bus 16
vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-ROM CD-224E-N, 3.AB> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ffe5 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub4 at uhub3 port 5
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | Dell PowerEdge 860 | | OpenBSD version tested: | 4.0-RELEASE | | OpenBSD support: | Full | | Disk system: | SCSI/SAS/IDE | | Notes (OpenBSD): | No changes necessary to run stock OpenBSD install. Information
provided by petri.niemela at epte dot fi and cblack at eragen dot com | | Availability: | Available | | Last changed: | April 10, 2007, 7:04 am | dmesg: OpenBSD 4.0 (GENERIC.MP) #936: Sat Sep 16 19:27:28 MDT 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
real mem = 1073053696 (1047904K)
avail mem = 970772480 (948020K)
using 4256 buffers containing 53755904 bytes (52496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/02/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev.
2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x4e00 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01E6 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: apic 2 int 16 (irq 5)
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 75340MB, 75340 cyl, 16 head, 128 sec, 512 bytes/sec, 154296320 sec total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 16 (irq 5), address 00:15:c5:f4:99:65
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 17 (irq 3), address 00:15:c5:f4:99:66
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: bus 0 dev
31 func 3 pin 2; line 3
pci_intr_map: no MP mapping found
: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask 0 netmask 0 ttymask 0
ioapic0: pin 16 shares different IPL interrupts (40..50), degraded performance
pctr: user-level cycle counter enabled
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1073086464 (1047936K)
avail mem = 907632640 (886360K)
using 22937 buffers containing 107515904 bytes (104996K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01E6 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.49 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.10 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: apic 2 int 16 (irq 5)
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 75340MB, 75340 cyl, 16 head, 128 sec, 512 bytes/sec, 154296320 sec total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 16 (irq 5), address 00:15:c5:f4:99:65
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 17 (irq 3), address 00:15:c5:f4:99:66
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: no mapping
for pin B (line=00)
: polling
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
cpu0: Enhanced SpeedStep disabled by BIOS
real mem = 1073053696 (1047904K)
avail mem = 970829824 (948076K)
using 4256 buffers containing 53755904 bytes (52496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/02/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev.
2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x4e00 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: irq 5
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 75340MB, 75340 cyl, 16 head, 128 sec, 512 bytes/sec, 154296320 sec total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 5,
address 00:15:c5:f4:99:65
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 3,
address 00:15:c5:f4:99:66
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 6
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0 (GENERIC) #690: Sat Sep 16 20:26:25 MDT 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073086464 (1047936K)
avail mem = 907747328 (886472K)
using 22937 buffers containing 107515904 bytes (104996K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.45 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: irq 5
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 75340MB, 75340 cyl, 16 head, 128 sec, 512 bytes/sec, 154296320 sec total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 5,
address 00:15:c5:f4:99:65
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 3,
address 00:15:c5:f4:99:66
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 6
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: no mapping
for pin B (line=00)
: polling
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 536215552 (523648K)
avail mem = 447283200 (436800K)
using 13142 buffers containing 53829632 bytes (52568K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfa5c0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01E6 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.48 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.11 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type PCI
mpbios: bus 9 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev 0x04
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev 0x04
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 2 int 16 (irq
5), address 00:15:17:15:b2:4c
em1 at pci3 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 2 int 17 (irq
3), address 00:15:17:15:b2:4d
ppb3 at pci2 dev 1 function 0 vendor "IDT", unknown product 0x8018 rev 0x04
pci4 at ppb3 bus 4
em2 at pci4 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 2 int 17 (irq
3), address 00:15:17:15:b2:4e
em3 at pci4 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 2 int 18 (irq
11), address 00:15:17:15:b2:4f
ppb4 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci6 at ppb5 bus 6
bge0 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 16 (irq 5), address 00:15:c5:f5:21:94
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb6 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci7 at ppb6 bus 7
bge1 at pci7 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 17 (irq 3), address 00:15:c5:f5:21:95
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb7 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci8 at ppb7 bus 8
vga1 at pci8 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-ROM CD-224E-N, 3.AB> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 20 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA3>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: no mapping
for pin B (line=00)
: polling
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302 |
| Back to overview | | Hardware configuration: | Dell PowerEdge 850 | | OpenBSD version tested: | 3.9-RELEASE | | OpenBSD support: | Full | | Disk system: | SATA/SCSI | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD/i386 install. Quad
Intel network card is *custom*.
PS2 mouse/keyboard does not work with amd64 on MP kernels. This should
be fixed in 4.0 though.
Information provided by Darek Eliasz (darek _at_ ksenon.to _dot_ pl)
Information provided by Petri Niemela (petri.niemela _at_ epte _dot_
fi) | | Availability: | Available | | Last changed: | October 26, 2006, 8:10 am | dmesg: OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 1073065984 (1047916K)
avail mem = 972435456 (949644K)
using 4278 buffers containing 53755904 bytes (52496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 08/16/05, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb840/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
ppb3 at pci3 dev 2 function 0 "IBM PCIX-PCIX" rev 0x02
pci4 at ppb3 bus 4
em0 at pci4 dev 4 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq 5, address
00:04:23:c2:b9:74
em1 at pci4 dev 4 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq 3, address
00:04:23:c2:b9:75
em2 at pci4 dev 6 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq 11, address
00:04:23:c2:b9:76
em3 at pci4 dev 6 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01: irq 10, address
00:04:23:c2:b9:77
ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 10,
address 00:14:22:7c:0a:85
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci6 at ppb5 bus 6
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 11,
address 00:14:22:7c:0a:86
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 6
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci7 at ppb6 bus 7
vga1 at pci7 dev 5 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8084N, 1.01> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD360GD-00FLC0>
wd0: 16-sector PIO, LBA48, 35304MB, 72303840 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask efcd netmask efed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
OpenBSD 3.9 (GENERIC.MP) #598: Thu Mar 2 02:37:06 MST 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
real mem = 1073065984 (1047916K)
avail mem = 972386304 (949596K)
using 4278 buffers containing 53755904 bytes (52496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/24/06, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb840/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #8 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2200 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01B7 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Enhanced SpeedStep disabled by BIOS
cpu0: apic clock running at 200 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apic 2
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apic 3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x07
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Symbios Logic MegaRAID 320-2E" rev 0x07: apic 2 int 18
(irq 5) Dell 2 32b
ami0: FW 521X, BIOS vH430, 128MB RAM
ami0: 2 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 34680MB, 34680 cyl, 64 head, 32 sec, 512 bytes/sec, 71024640 sec total
scsibus1 at ami0: 16 targets
scsibus2 at ami0: 16 targets
ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x07
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci5 at ppb4 bus 5
em0 at pci5 dev 2 function 0 "Intel PRO/1000MT (82546EB)" rev 0x01: apic 3 int 3 (irq
3), address 00:04:23:cd:85:8a
em1 at pci5 dev 2 function 1 "Intel PRO/1000MT (82546EB)" rev 0x01: apic 3 int 2 (irq
5), address 00:04:23:cd:85:8b
ppb5 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci6 at ppb5 bus 6
bge0 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 16 (irq 11), address 00:15:c5:5f:96:ba
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb6 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci7 at ppb6 bus 7
bge1 at pci7 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 17 (irq 10), address 00:15:c5:5f:96:bb
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb7 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci8 at ppb7 bus 8
vga1 at pci8 dev 5 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8084N, 1.01> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: bus 0 dev
31 func 3 pin 2; line 5
pci_intr_map: no MP mapping found
: irq 5
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
cpu1: Enhanced SpeedStep disabled by BIOS
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Avocent Dell 03R874, rev 1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1
uhidev1: Avocent Dell 03R874, rev 1.10/1.00, addr 2, iclass 3/1
uhidev1: 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
OpenBSD 3.9 (GENERIC.MP) #736: Thu Mar 2 04:02:03 MST 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146828288 (2096512K)
avail mem = 1835593728 (1792572K)
using 22937 buffers containing 214892544 bytes (209856K) of memory
mainbus0 (root)
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01B6 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 3.20GHz, 3200.55 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.20GHz, 3200.12 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xffff80000373de24, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x07
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Symbios Logic MegaRAID 320-2E" rev 0x07: apic 2 int 18
(irq 5) Dell 2 32b
ami0: FW 522A, BIOS vH430, 128MB RAM
ami0: 2 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 69880MB, 69880 cyl, 64 head, 32 sec, 512 bytes/sec, 143114240 sec total
scsibus1 at ami0: 16 targets
scsibus2 at ami0: 16 targets
ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x07
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 16 (irq 3), address 00:15:c5:e1:c6:54
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci6 at ppb5 bus 6
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 17 (irq 11), address 00:15:c5:e1:c6:55
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci7 at ppb6 bus 7
vga1 at pci7 dev 5 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <PHILIPS, DVD-ROM SDR089, TD36> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: no mapping
for pin B (line=00)
: polling
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | Dell PowerEdge 750 | | OpenBSD version tested: | 3.7 | | OpenBSD support: | Full | | Disk system: | SCSI/FibreChannel | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install. For the FC
support, was necessary to rebuild the kernel with "option
ISP_COMPILE_FW", as described in isp(4).
Information submitted by jason _at_ dixongroup.net | | Availability: | Model discontinued by manufacturer | | Last changed: | December 27, 2005, 12:12 pm | dmesg: OpenBSD 3.7 (GENERIC) #3: Mon Oct 24 22:08:52 EDT 2005
root@foobar:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,ACPI,
MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID
real mem = 1073065984 (1047916K)
avail mem = 971755520 (948980K)
using 4278 buffers containing 53755904 bytes (52496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/16/05, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc570/144 (7 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x25a1
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x5600 0xce800/0x1000
0xec000/0x400
0!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: irq 3, address:
00:12:
3f:25:43:fc
ppb1 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci2 at ppb1 bus 2
ahc1 at pci2 dev 1 function 0 "Adaptec AHA-3960D U160" rev 0x01: irq 11
scsibus0 at ahc1: 16 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST373207LW, D702> SCSI3 0/ direct fixed
sd0: 70007MB, 90774 cyl, 2 head, 789 sec, 512 bytes/sec, 143374650 sec total
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST373207LW, D702> SCSI3 0/ direct fixed
sd1: 70007MB, 90774 cyl, 2 head, 789 sec, 512 bytes/sec, 143374650 sec total
ahc2 at pci2 dev 1 function 1 "Adaptec AHA-3960D U160" rev 0x01: irq 11
scsibus1 at ahc2: 16 targets
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 7
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci3 at ppb2 bus 3
em1 at pci3 dev 2 function 0 "Intel PRO/1000MT (82541EI)" rev 0x00: irq 10, address:
00:12
:3f:25:43:fd
isp0 at pci3 dev 3 function 0 "QLogic ISP2300" rev 0x01: irq 11
scsibus2 at isp0: 256 targets
sd2 at scsibus2 targ 0 lun 1: <APPLE, Xserve RAID, 1.26> SCSI5 0/ direct fixed
sd2: 478736MB, 59842 cyl, 128 head, 128 sec, 512 bytes/sec, 980451328 sec total
vga1 at pci3 dev 14 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel 0
configured
to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"Intel 6300ESB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efe5 netmask efed ttymask ffef
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 80.0MHz DT, offset = 0x3f
ahc1: target 1 using 16bit transfers
ahc1: target 1 synchronous at 80.0MHz DT, offset = 0x3f
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors is 142185216 (69426 MB) as root
dkcsum: sd0 matched BIOS disk 80
dkcsum: sd1 matched BIOS disk 81
dkcsum: sd2 had no matching BIOS disk
rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
raid0: Device already configured!
|
| Back to overview | | Hardware configuration: | Dell PowerEdge 1850 | | OpenBSD version tested: | 3.8 | | OpenBSD support: | Full | | Disk system: | SCSI/RAID | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install.
Information submitted by Chris.Gamboni _at_ rtsi.ch | | Availability: | Available | | Last changed: | December 23, 2005, 11:12 am | dmesg: OpenBSD 3.8-stable (GENERIC) #2: Mon Dec 19 15:13:40 CET 2005
root@mailgateway2.rtsi.dmz:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 1073065984 (1047916K)
avail mem = 972541952 (949748K)
using 4278 buffers containing 53755904 bytes (52496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb140/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #9 is the last bus
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000 0xcc000/0x1000 0xcd000/0x3c00
0xd1000/0x2200 0xd3800/0x600 0xec000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x06
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: irq 7 Dell 16c/32b
ami0: FW 521S, BIOS vH430, 256MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 34680MB, 4421 cyl, 255 head, 63 sec, 512 bytes/sec, 71024640 sec total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x2 SCSI BP, 1.0> SCSI2 3/processor fixed
ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06
pci3 at ppb2 bus 3
ppb3 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 5 function 0 "Intel E7710 MCH PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 6
em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 11, address:
00:14:22:1c:3c:5b
ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 3, address:
00:14:22:1c:3c:5c
ppb7 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x09
pci8 at ppb7 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 7
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci9 at ppb8 bus 9
vendor "Dell", unknown product 0x0011 (class undefined unknown subclass 0x00, rev 0x00)
at pci9 dev 5 function 0 not configured
vendor "Dell", unknown product 0x0012 (class undefined unknown subclass 0x00, rev 0x00)
at pci9 dev 5 function 1 not configured
vendor "Dell", unknown product 0x0014 (class undefined unknown subclass 0x00, rev 0x00)
at pci9 dev 5 function 2 not configured
pciide0 at pci9 dev 6 function 0 "CMD Technology PCI0680" rev 0x02
pciide0: bus-master DMA support present
pciide0: channel 0 wired to native-PCI mode
pciide0: using irq 5 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
sd1 at scsibus2 targ 0 lun 0: <DELL, VSF, 0123> SCSI0 0/direct removable
sd1: drive offline
atapiscsi1 at pciide0 channel 0 drive 1
scsibus3 at atapiscsi1: 2 targets
cd0 at scsibus3 targ 0 lun 0: <DELL, VCD, 0133> SCSI0 5/cdrom removable
sd1(pciide0:0:0): using PIO mode 3
cd0(pciide0:0:1): using PIO mode 3
pciide0: channel 1 wired to native-PCI mode
vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide1 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi2 at pciide1 channel 0 drive 0
scsibus4 at atapiscsi2: 2 targets
cd1 at scsibus4 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8082N, 0106> SCSI0 5/cdrom
removable
cd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask efe5 netmask efed ttymask ffef
pctr: user-level cycle counter enabled
uhub4 at uhub3 port 3
uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2
uhub4: 2 ports with 2 removable, self powered, multiple transaction translators
uhidev0 at uhub0 port 1 configuration 1 interface 0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
uhidev0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported |
| Back to overview | | Hardware configuration: | Dell PowerEdge 650 | | OpenBSD version tested: | 3.8 | | OpenBSD support: | Full | | Disk system: | SATA/RAID | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install.
CERC/SATA RAID controller is supported by ami(4).
Information submitted by petri.niemela _at_ epte.fi | | Availability: | Model discontinued by manufacturer | | Last changed: | December 23, 2005, 11:12 am | dmesg: OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM
real mem = 1073262592 (1048108K)
avail mem = 972726272 (949928K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/02/03, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc500/96 (4 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1166 product 0x0203
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1400 0xec000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC_SL Host" rev 0x32
pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC_SL Host" rev 0x00
pci1 at pchb1 bus 1
em0 at pci1 dev 3 function 0 "Intel PRO/1000MT (82546EB)" rev 0x01: irq 10, address:
00:04:23:64:80:70
em1 at pci1 dev 3 function 1 "Intel PRO/1000MT (82546EB)" rev 0x01: irq 7, address:
00:04:23:64:80:71
ami0 at pci0 dev 3 function 0 "AMI MegaRAID" rev 0x02: irq 15 Dell 511/64b/lhc
ami0: FW 6.62, BIOS v1.03, 16MB RAM
ami0: 4 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 76278MB, 9724 cyl, 255 head, 63 sec, 512 bytes/sec, 156217344 sec total
scsibus1 at ami0: 16 targets
scsibus2 at ami0: 16 targets
scsibus3 at ami0: 16 targets
scsibus4 at ami0: 16 targets
vga1 at pci0 dev 4 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb2 at pci0 dev 15 function 0 "ServerWorks CSB6 PCI" rev 0xa0
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB6 IDE" rev 0xa0: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus5 at atapiscsi0: 2 targets
cd0 at scsibus5 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: no compatibility interrupt for use by channel 1
ohci0 at pci0 dev 15 function 2 "ServerWorks CSB6 USB" rev 0x05: irq 11, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB6 LPC" rev 0x00
pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
pci2 at pchb4 bus 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb6d netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | Dell PowerEdge 2850 | | OpenBSD version tested: | 3.9-RELEASE | | OpenBSD support: | Full | | Disk system: | SCSI/RAID | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install.
Information submitted by darek _at_ ksenon.to.pl | | Availability: | Available | | Last changed: | May 26, 2006, 3:05 am | dmesg: OpenBSD 3.9 (GENERIC.MP) #598: Thu Mar 2 02:37:06 MST 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 3757420544 (3669356K)
avail mem = 3422261248 (3342052K)
using 4278 buffers containing 187973632 bytes (183568K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb600/320 (18 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #9 is the last bus
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x2200 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 016D )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apic 8
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apic 9
ioapic2 at mainbus0: apid 10 pa 0xfec83000, version 20, 24 pins
ioapic2: misconfigured as apic 0, remapped to apic 10
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x06
pci2 at ppb1 bus 2
ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: apic 9 int 14 (irq 7) Dell
16d 32b
ami0: FW 521X, BIOS vH430, 256MB RAM
ami0: 2 channels, 0 FC loops, 2 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 209640MB, 209640 cyl, 64 head, 32 sec, 512 bytes/sec, 429342720 sec total
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 34680MB, 34680 cyl, 64 head, 32 sec, 512 bytes/sec, 71024640 sec total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x6 SCSI BP, 1.0> SCSI2 3/processor fixed
scsibus2 at ami0: 16 targets
ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06
pci3 at ppb2 bus 3
ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 6
em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 10 int 0 (irq
11), address 00:14:22:1b:af:5a
ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 10 int 1 (irq
3), address 00:14:22:1b:af:5b
ppb7 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x09
pci8 at ppb7 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 8 int 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 8 int 19 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 8 int 18 (irq 7)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 8 int 23 (irq 5)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci9 at ppb8 bus 9
vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462C, DE01> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
uhub4 at uhub3 port 3
uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2
uhub4: 2 ports with 2 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | Dell PowerEdge SC1425 | | OpenBSD version tested: | 4.0-STABLE | | OpenBSD support: | Full | | Disk system: | SATA | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install. Make sure
to update your BIOS to the latest version. Otherwise, the PS/2
keyboard will not work with GENERIC.MP | | Availability: | Available | | Last changed: | January 31, 2007, 9:01 am | dmesg: OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 536215552 (523648K)
avail mem = 447283200 (436800K)
using 13142 buffers containing 53829632 bytes (52568K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfa850 (75 entries)
bios0: Dell Computer Corporation PowerEdge SC1425
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE SC1425 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz, 2800.45 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 1MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0 apid 3 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
ioapic2 at mainbus0 apid 4 pa 0xfec80800, version 20, 24 pins
ioapic2: misconfigured as apic 0, remapped to apid 4
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
em0 at pci2 dev 4 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 3 int 0 (irq
11), address 00:14:22:09:38:a4
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 2 int 23 (irq 6)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci4 at ppb3 bus 4
em1 at pci4 dev 3 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 2 int 20 (irq
3), address 00:14:22:09:38:a5
vga1 at pci4 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 18 (irq 5) for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
umass0 at uhub2 port 3 configuration 1 interface 0
umass0: Western Digital External HDD, rev 2.00/1.07, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <WD, 1600JB External, 0107> SCSI0 0/direct fixed
sd0: 152627MB, 152627 cyl, 64 head, 32 sec, 512 bytes/sec, 312581808 sec total
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0-stable (GENERIC) #2: Wed Jan 24 14:41:05 CET 2007
root@dev-4-amd64.lab.armorlogic.com:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 536215552 (523648K)
avail mem = 447393792 (436908K)
using 13142 buffers containing 53829632 bytes (52568K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfa850 (75 entries)
bios0: Dell Computer Corporation PowerEdge SC1425
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz, 2800.48 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 1MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
em0 at pci2 dev 4 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 11, address
00:14:22:09:38:a4
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 6
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci4 at ppb3 bus 4
em1 at pci4 dev 3 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 3, address
00:14:22:09:38:a5
vga1 at pci4 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
umass0 at uhub2 port 3 configuration 1 interface 0
umass0: Western Digital External HDD, rev 2.00/1.07, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <WD, 1600JB External, 0107> SCSI0 0/direct fixed
sd0: 152627MB, 152627 cyl, 64 head, 32 sec, 512 bytes/sec, 312581808 sec total
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 3.9 (GENERIC) #462: Thu Mar 2 03:52:16 MST 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 536215552 (523648K)
avail mem = 448028672 (437528K)
using 13142 buffers containing 53829632 bytes (52568K) of memory
mainbus0 (root)
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz, 2800.48 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 1MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
em0 at pci2 dev 4 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 11, address
00:14:22:09:3a:a8
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 3 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 6
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci4 at ppb3 bus 4
em1 at pci4 dev 3 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 3, address
00:14:22:09:3a:a9
vga1 at pci4 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6Y080M0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302 |
| Back to overview | | Hardware configuration: | Fujitsu Siemens Primergy BX630 | | OpenBSD version tested: | 4.0-STABLE | | OpenBSD support: | Full | | Disk system: | SATA/SAS | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install. | | Availability: | Available | | Last changed: | April 18, 2007, 2:20 pm | dmesg: OpenBSD 4.0-stable (GENERIC.MP) #0: Mon Jan 29 11:42:00 CET 2007
root@dev-4-i386.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Dual Core AMD Opteron(tm) Processor 270 ("AuthenticAMD" 686-class, 1024KB L2
cache) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3
real mem = 3756531712 (3668488K)
avail mem = 3442573312 (3361888K)
using 4256 buffers containing 187928576 bytes (183524K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 10/26/06, BIOS32 rev. 0 @ 0xfd4e0, SMBIOS rev.
2.4 @ 0xdfefc000 (110 entries)
bios0: FUJITSU SIEMENS PRIMERGY BX630
pcibios0 at bios0: rev 2.1 @ 0xfd4e0/0xb20
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdce0/768 (46 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1022 product 0x746b
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x4e00
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca2/2 spacing 1 irq 0
mainbus0: Intel MP Specification (Version 1.4) (AMD HAMMER )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 270 ("AuthenticAMD" 686-class, 1024KB L2
cache) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Dual Core AMD Opteron(tm) Processor 270 ("AuthenticAMD" 686-class, 1024KB L2
cache) 2 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Dual Core AMD Opteron(tm) Processor 270 ("AuthenticAMD" 686-class, 1024KB L2
cache) 2 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
ioapic0: duplicate apic id, remapped to apid 4
ioapic1 at mainbus0: apid 2 pa 0xe8000000, version 11, 4 pins
ioapic1: duplicate apic id, remapped to apid 5
ioapic2 at mainbus0: apid 3 pa 0xe8001000, version 11, 4 pins
ioapic2: duplicate apic id, remapped to apid 6
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 4 int 19 (irq 11), version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 4 int 19 (irq 11), version
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci1 dev 5 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD AMD8111 LPC" rev 0x05
amdpm0 at pci0 dev 7 function 3 "AMD 8111 Power" rev 0x05: rng active
iic0 at amdpm0: disabled to avoid ipmi0 interactions
ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x13
pci2 at ppb1 bus 2
mpi0 at pci2 dev 4 function 0 "Symbios Logic SAS1068" rev 0x01: apic 5 int 0 (irq 5)
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed
sd0: 151634MB, 151634 cyl, 16 head, 128 sec, 512 bytes/sec, 310546432 sec total
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 10 function 1 not configured
ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x13
pci3 at ppb2 bus 3
bge0 at pci3 dev 4 function 0 "Broadcom BCM5704S" rev 0x10, BCM5704 B0 (0x2100): apic 6
int 0 (irq 5), address 00:30:05:71:bb:29
bge1 at pci3 dev 4 function 1 "Broadcom BCM5704S" rev 0x10, BCM5704 B0 (0x2100): apic 6
int 1 (irq 10), address 00:30:05:71:bb:2a
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 11 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | Fujitsu Siemens Primergy RX300 S2 | | OpenBSD version tested: | 3.7-current | | OpenBSD support: | Partial | | Disk system: | SCSI | | Notes (OpenBSD): | Disable built-in MEGAraid controller to get the discs working. When
you disable the MEGAraid controller, the system falls back to an LSI
1030 RAID/SCSI controller (which doesn't work in IME/integrated
mirroring mode).
OpenBSD 3.8 has much better AMI MEGAraid controller support, hence it
might work in 3.8 and later releases.
When running with more than 1 CPU, disable pcibios using boot -c or
directly in the kernel via config(8). Otherwise, you will see a
message about "degraded performance". This is due to BIOS issues and
apparently flawed interrupt routning. | | Availability: | Available | | Last changed: | December 20, 2005, 11:12 am | dmesg: OpenBSD 3.7-current (GENERIC.MP) #96: Tue Apr 26 17:31:45 MDT 2005
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,EST,TM2,CNXT-ID
real mem = 2146455552 (2096148K)
avail mem = 1952612352 (1906848K)
using 4278 buffers containing 107425792 bytes (104908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(02) BIOS, date 12/22/04, BIOS32 rev. 0 @ 0xfd66a
pcibios0 at bios0: rev 2.1 @ 0xfd5b0/0xa50
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde30/432 (25 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #9 is the last bus
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000 0xca000/0x4000
mainbus0: Intel MP Specification (Version 1.4) (FSCD1889 PRIMERGY )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Enhanced SpeedStep disabled by BIOS
cpu0: apic clock running at 200 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,EST,TM2,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0: apid 4 pa 0xfec80800, version 20, 24 pins
ioapic3 at mainbus0: apid 5 pa 0xfec84000, version 20, 24 pins
ioapic4 at mainbus0: apid 8 pa 0xfec84800, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0a
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0a
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x07
pci2 at ppb1 bus 2
mpt0 at pci2 dev 8 function 0 "Symbios Logic 53c1030" rev 0x08: apic 3 int 0 (irq 11)
mpt0: IM support: 6
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAP3735NC, 5207> SCSI3 0/direct fixed
sd0: 70103MB, 47996 cyl, 4 head, 747 sec, 512 bytes/sec, 143571316 sec total
sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAP3735NC, 5207> SCSI3 0/direct fixed
sd1: 70103MB, 47996 cyl, 4 head, 747 sec, 512 bytes/sec, 143571316 sec total
sd2 at scsibus0 targ 2 lun 0: <FUJITSU, MAP3735NC, 5207> SCSI3 0/direct fixed
sd2: 70103MB, 47996 cyl, 4 head, 747 sec, 512 bytes/sec, 143571316 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpt0: target 2 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpt1 at pci2 dev 8 function 1 "Symbios Logic 53c1030" rev 0x08: apic 3 int 1 (irq 9)
mpt1: IM support: 6
scsibus1 at mpt1: 16 targets
ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x07
pci3 at ppb2 bus 3
ppb3 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0a
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): apic 2
int 16 (irq 11) address 00:30:05:80:1f:f9
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 5 function 0 "Intel E7710 MCH PCIE" rev 0x0a
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): apic 2
int 16 (irq 11) address 00:30:05:76:7e:29
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0a
pci6 at ppb5 bus 6
ppb6 at pci6 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
ppb7 at pci6 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci8 at ppb7 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 18 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 23 (irq 4)
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci9 at ppb8 bus 9
vga1 at pci9 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8082N, 0002> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask 0 netmask 0 ttymask 0
ioapic0: pin 16 shares different IPL interrupts (40..50), degraded performance
pctr: user-level cycle counter enabled
dkcsum: sd0 matched BIOS disk 80
dkcsum: warning: dup BSD->BIOS disk mapping
dkcsum: sd1 matched BIOS disk 81
dkcsum: warning: dup BSD->BIOS disk mapping
dkcsum: sd2 matched BIOS disk 82
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
cpu1: Enhanced SpeedStep disabled by BIOS |
| Back to overview | | Hardware configuration: | HP Proliant DL360 G5 | | OpenBSD version tested: | 4.5 | | OpenBSD support: | Full | | Disk system: | SCSI/RAID SmartArray | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install. | | Availability: | Available | | Last changed: | April 27, 2010, 8:04 am | dmesg: OpenBSD 4.5-stable (GENERIC.MP) #4: Wed May 13 22:25:55 CEST 2009
root@i386.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU 5150 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3487477760 (3325MB)
avail mem = 3382706176 (3226MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.4
@ 0xee000 (68 entries)
bios0: vendor HP version "P58" date 06/25/2008
bios0: HP ProLiant DL360 G5
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SPCR MCFG HPET SPMI ERST APIC FFFF BERT HEST SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 333MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(R) CPU 5150 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(R) CPU 5150 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(R) CPU 5150 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
acpiprt0 at acpi0: bus 1 (IP2P)
acpiprt1 at acpi0: bus 11 (IPE1)
acpiprt2 at acpi0: bus 10 (IPE4)
acpiprt3 at acpi0: bus 16 (P2P2)
acpiprt4 at acpi0: bus 9 (PT02)
acpiprt5 at acpi0: bus 6 (PT03)
acpiprt6 at acpi0: bus 19 (PT04)
acpiprt7 at acpi0: bus 3 (NB01)
acpiprt8 at acpi0: bus 5 (NB02)
acpiprt9 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3
acpicpu1 at acpi0: C3
acpicpu2 at acpi0: C3
acpicpu3 at acpi0: C3
acpitz0 at acpi0: critical temperature 31 degC
bios0: ROM list: 0xc0000/0xb000 0xcc400/0x4000! 0xd0400/0x1800 0xd1c00/0x1800
0xe6000/0x2000!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 9
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 10
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 11
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 12
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16 (irq 5)
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 14
ppb5 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci6 at ppb5 bus 15
ppb6 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci7 at ppb6 bus 16
ppb7 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci8 at ppb7 bus 6
ciss0 at pci8 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x03: apic 8 int 16
(irq 5)
ciss0: 1 LD, HW rev 3, FW 5.20/5.20
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 5.20> SCSI3 0/direct fixed
sd0: 209919MB, 512 bytes/sec, 429915465 sec total
ppb8 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0xb1
pci9 at ppb8 bus 19
ppb9 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci10 at ppb9 bus 22
ppb10 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0xb1
pci11 at ppb10 bus 2
ppb11 at pci11 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci12 at ppb11 bus 3
bnx1 at pci12 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 18 (irq 10)
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci13 at ppb12 bus 4
ppb13 at pci13 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci14 at ppb13 bus 5
bnx2 at pci14 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 19 (irq 7)
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8 int 16 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8 int 17 (irq 7)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8 int 18 (irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 8 int 19 (irq 7)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8 int 16 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb14 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci15 at ppb14 bus 1
vga1 at pci15 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 8 int 23 (irq 5)
drm0 at radeondrm0
"Compaq iLO" rev 0x03 at pci15 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci15 dev 4 function 2 not configured
uhci4 at pci15 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8 int 22 (irq 10)
"Hewlett-Packard IPMI" rev 0x00 at pci15 dev 4 function 6 not configured
usb1 at uhci4: USB revision 1.0
uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual Keyboard" rev 1.10/0.02
addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual Keyboard" rev 1.10/0.02
addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse1 at ums0 mux 0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx0: address 00:1e:0b:d8:b6:96
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx1: address 00:21:5a:ac:48:c0
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx2: address 00:21:5a:ac:48:b0
brgphy2 at bnx2 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6 |
| Back to overview | | Hardware configuration: | HP Proliant DL360 G3 | | OpenBSD version tested: | 3.9-STABLE | | OpenBSD support: | Full | | Disk system: | SCSI/RAID SmartArray | | Notes (OpenBSD): | No modifications needed to run a stock OpenBSD/i386 install.
Information provided by Didier Wiroth (didier.wiroth _at_ mcesr _dot_
etat.lu) | | Availability: | Available | | Last changed: | May 23, 2006, 12:05 pm | dmesg: OpenBSD 3.9 (GENERIC.MP) #1: Tue Apr 18 20:29:38 CEST 2006
root@devel:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 3220783104 (3145296K)
avail mem = 2931236864 (2862536K)
using 4278 buffers containing 161140736 bytes (157364K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800 0xee000/0x2000!
mainbus0: Intel MP Specification (Version 1.4) (COMPAQ PROLIANT )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 16 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
ioapic3 at mainbus0: apid 5 pa 0xfec03000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x32
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci1 at pchb2 bus 1
bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2 (0x1002): apic 3
int 14 (irq 11), address 00:0b:cd:fd:fa:4b
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01: apic 3 int 15
(irq 3)
ciss0: 1 LD, HW rev 1, FW 2.58/2.58
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.58> SCSI0 0/direct fixed
sd0: 34719MB, 34719 cyl, 64 head, 32 sec, 512 bytes/sec, 71106240 sec total
"Compaq iLO" rev 0x01 at pci0 dev 5 function 0 not configured
"Compaq iLO" rev 0x01 at pci0 dev 5 function 2 not configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93
iic0 at piixpm0
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DW-224E, A.1K> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2 int 10 (irq
10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb4 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb5 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci2 at pchb5 bus 4
bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2 (0x1002): apic 3
int 13 (irq 15), address 00:0b:cd:fd:fa:47
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | HP Proliant DL380 G4 | | OpenBSD version tested: | 3.9 | | OpenBSD support: | Full | | Disk system: | SCSI/RAID | | Notes (OpenBSD): | OpenBSD 3.9 should work fine on this machine. Full report will be
available later. | | Availability: | Available | | Last changed: | April 20, 2006, 12:04 pm | dmesg: No data available. |
| Back to overview | | Hardware configuration: | HP Proliant DL360 G4P | | OpenBSD version tested: | 3.8 | | OpenBSD support: | Full | | Disk system: | SCSI/RAID SmartArray | | Notes (OpenBSD): | Armorlogic has tested the ciss driver on SmartArray P600/6i/6400
controllers and they all work as expected. Make sure to update your
kernel to -STABLE to get few important stability/performance fixes.
Please note, that SAS (Serial Attach Storage) SmartArray P600
controller only works in OpenBSD 3.8-current.
When running with more than 1 CPU, disable pcibios using boot -c or
directly in the kernel via config(8). Otherwise, you will see a
message about "degraded performance". This is due to BIOS issues and
apparently flawed interrupt routning. | | Availability: | Available | | Last changed: | December 16, 2005, 1:12 am | dmesg: OpenBSD 3.8 (GENERIC.MP) #6: Sat Dec 22 11:51:54 CET 2005
root@i386.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 1073270784 (1048116K)
avail mem = 972677120 (949880K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x1600 0xee000/0x2000!
mainbus0: Intel MP Specification (Version 1.4) (HP PROLIANT )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 13 is type PCI
mainbus0: bus 32 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec10000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apic 9
ioapic2 at mainbus0: apid 10 pa 0xfec82000, version 20, 24 pins
ioapic3 at mainbus0: apid 11 pa 0xfec82400, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci1 at ppb0 bus 13
ppb1 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci2 at ppb1 bus 6
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 7
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 10
ppb4 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci5 at ppb4 bus 3
ppb5 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci6 at ppb5 bus 2
ciss0 at pci6 dev 1 function 0 "Compaq Smart Array 64xx" rev 0x01: apic 9 int 0 (irq 5)
ciss0: 1 LD HW rev 1 FW 2.58/2.58
lmap 40000000:0 scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.58> SCSI0 0/direct fixed
sd0: 34727MB, 34727 cyl, 64 head, 32 sec, 512 bytes/sec, 71122560 sec total
bge0 at pci6 dev 2 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 9
int 1 (irq 5) address 00:15:60:0f:61:c8
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci6 dev 2 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 9
int 2 (irq 5) address 00:15:60:0f:61:c7
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 8 int 16 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: apic 8 int 19 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 8 int 23 (irq 5)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci7 at ppb6 bus 1
vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous, rev 0x01)
at pci7 dev 4 function 0 not configured
vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous, rev 0x01)
at pci7 dev 4 function 2 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 2.03> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | HP Proliant DL145 G1 | | OpenBSD version tested: | 3.6 | | OpenBSD support: | Full | | Disk system: | ATA, SCSI | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install.
Armorlogic tested both the SATA and SCSI models. They both work
equally well. | | Availability: | Model discontinued by manufacturer | | Last changed: | June 1, 2005, 1:06 am | dmesg: OpenBSD 3.6 (GENERIC) #136: Fri Sep 17 12:28:10 MDT 2004
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147020800 (2096700K)
avail mem = 1837256704 (1794196K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 244, 1791.75 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 1 function 0 "AMD 8131 PCIX" rev 0x12
pci1 at ppb0 bus 3
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 1 function 1 not configured
ppb1 at pci0 dev 2 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x03: irq 10 address
00:00:1a:1a:5a:a2
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x03: irq 11 address
00:00:1a:1a:5a:a1
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 2 function 1 not configured
ppb2 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci3 at ppb2 bus 1
ohci0 at pci3 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 10, version 1.0, legacy
support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci3 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 10, version 1.0, legacy
support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci3 dev 4 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"AMD AMD8111 LPC" rev 0x05 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 configured to
compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: channel 1 disabled (no drives)
"AMD 8111 ACPI" rev 0x05 at pci0 dev 7 function 3 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lm0 at isa0 port 0x290/8: W83627HF
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302 |
| Back to overview | | Hardware configuration: | HP Proliant DL320 G3 | | OpenBSD version tested: | 3.8-current | | OpenBSD support: | Partial | | Disk system: | SATA | | Notes (OpenBSD): | On-board Intel 82801FR SATA controller has performance issues. Writing
into files with dd shows around 6MB/sec throughput. | | Availability: | Available | | Last changed: | December 20, 2005, 11:12 am | dmesg: OpenBSD 3.8-current (GENERIC) #295: Mon Dec 5 16:28:40 MST 2005
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 1073270784 (1048116K)
avail mem = 972701696 (949904K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x3400! 0xcb400/0x1600 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05
ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): irq 5,
address 00:12:79:3c:3f:a1
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): irq 7,
address 00:12:79:3c:3f:a0
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 7
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci5 at ppb4 bus 5
"Compaq iLO" rev 0x01 at pci5 dev 2 function 0 not configured
"Compaq iLO" rev 0x01 at pci5 dev 2 function 2 not configured
vga1 at pci5 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8163B, 0B15> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 7 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6Y080M0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efe5 netmask efe5 ttymask ffe7
pctr: user-level cycle counter enabled
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: HP Virtual Management Device, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev0
ums0: X report 0x0002 not supported
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302 |
| Back to overview | | Hardware configuration: | HP Proliant DL385 | | OpenBSD version tested: | 3.9 | | OpenBSD support: | Partial | | Disk system: | SCSI/RAID | | Notes (OpenBSD): | There are reports that DL385 panics under heavy load on OpenBSD 3.9,
but otherwise works fine. Full report will be available later. | | Availability: | Available | | Last changed: | April 20, 2006, 12:04 pm | dmesg: No data available. |
| Back to overview | | Hardware configuration: | HP Proliant BL45p | | OpenBSD version tested: | 3.8 | | OpenBSD support: | Partial | | Disk system: | SCSI/RAID | | Notes (OpenBSD): | Support for integrated SmartArray RAID controllers appeared in 3.8.
However, the support has issues and we recommend to install/run
OpenBSD 3.8-current and later for full support.
BL45p has 4 network interfaces. However, OpenBSD can only see the
first two.
Bug report:
http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=4301 | | Availability: | Available | | Last changed: | January 30, 2006, 12:01 pm | dmesg: OpenBSD 3.8 (GENERIC.MP) #504: Sat Sep 10 16:02:38 MDT 2005
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2147045376 (2096724K)
avail mem = 1836384256 (1793344K)
using 22937 buffers containing 214913024 bytes (209876K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (HP PROLIANT )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 875, 2205.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 200454647Hz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: AMD Opteron(tm) Processor 875, 2205.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2 at mainbus0: apid 1 (application processor)
cpu2: AMD Opteron(tm) Processor 875, 2205.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Opteron(tm) Processor 875, 2205.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 32 is type ISA
ioapic0 at mainbus0 apid 4: pa 0xffff800003744f24, version 11, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xffff800003744e24, version 11, 4 pins
ioapic2 at mainbus0 apid 6: pa 0xffff800003744d24, version 11, 4 pins
ioapic3 at mainbus0 apid 7: pa 0xffff800003744c24, version 11, 4 pins
ioapic4 at mainbus0 apid 8: pa 0xffff800003744b24, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 3 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 4 int 19 (irq 5), version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 4 int 19 (irq 5), version
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci1 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous, rev 0x01)
at pci1 dev 4 function 0 not configured
vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous, rev 0x01)
at pci1 dev 4 function 2 not configured
"AMD AMD8111 LPC" rev 0x05 at pci0 dev 4 function 0 not configured
pciide0 at pci0 dev 4 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 configured to
compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
"AMD 8111 ACPI" rev 0x05 at pci0 dev 4 function 3 not configured
ppb1 at pci0 dev 7 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 2 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 5
int 0 (irq 7) address 00:13:21:b4:32:38
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 2 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 5
int 1 (irq 10) address 00:13:21:b4:32:37
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
aapic0 at pci0 dev 7 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
ppb2 at pci0 dev 8 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
ciss0 at pci3 dev 2 function 0 "Compaq Smart Array 64xx" rev 0x01: apic 6 int 0 (irq 7)
ciss0: 1 LD HW rev 1 FW 2.48/2.48
lmap 40000000:0 scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.48> SCSI0 0/direct fixed
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
sd0: 34727MB, 34727 cyl, 64 head, 32 sec, 512 bytes/sec, 71122560 sec total
aapic1 at pci0 dev 8 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: HP Virtual Management Device, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev0
ums0: X report 0x0002 not supported
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0 |
| Back to overview | | Hardware configuration: | HP Proliant DL580 G3 | | OpenBSD version tested: | 3.8 | | OpenBSD support: | Partial | | Disk system: | SCSI/RAID | | Notes (OpenBSD): | OpenBSD 3.8 can boot on the machine, but seems to have various issues
related to multiprocessor support and on-board Broadcom network
interfaces.
Support for integrated SmartArray RAID controllers appeared in 3.8.
However, the support has issues and we recommend to install/run
OpenBSD 3.8-current and later for full support.
Armorlogic had very little exposure to this machine and hence can't
provide very detailed information. | | Availability: | Available | | Last changed: | December 19, 2005, 3:12 am | dmesg: OpenBSD 3.8 (GENERIC) #286: Wed Nov 30 11:32:11 MST 2005
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) MP CPU 3.33GHz ("GenuineIntel" 686-class) 3.34 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,
FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,CNXT-ID
cpu0: Enhanced SpeedStep disabled by BIOS
real mem = 3756474368 (3668432K)
avail mem = 3421523968 (3341332K)
using 4278 buffers containing 187928576 bytes (183524K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #12 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x1800 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x2600 rev 0x10
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x2601 rev 0x10
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): irq 5,
address 00:0b:cd:c4:d5:3b
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10pci_intr_map: no mapping for
pin B
: couldn't map interrupt
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
ciss0 at pci3 dev 1 function 0 "Compaq Smart Array 64xx" rev 0x01: irq 5
ciss0: 1 LD HW rev 1 FW 2.36/2.36
lmap 40000000:0 scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.36> SCSI0 0/direct fixed
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
sd0: 138911MB, 138911 cyl, 64 head, 32 sec, 512 bytes/sec, 284490240 sec total
ppb3 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x2608 rev 0x10
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci4 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 6
ppb6 at pci0 dev 3 function 0 vendor "Intel", unknown product 0x2603 rev 0x10
pci7 at ppb6 bus 7
ppb7 at pci0 dev 4 function 0 vendor "Intel", unknown product 0x2609 rev 0x10
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci9 at ppb8 bus 12
"Compaq iLO" rev 0x01 at pci9 dev 2 function 0 not configured
"Compaq iLO" rev 0x01 at pci9 dev 2 function 2 not configured
vga1 at pci9 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb9 at pci8 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci10 at ppb9 bus 15
ppb10 at pci0 dev 5 function 0 vendor "Intel", unknown product 0x2605 rev 0x10
pci11 at ppb10 bus 9
ppb11 at pci0 dev 6 function 0 vendor "Intel", unknown product 0x2606 rev 0x10
pci12 at ppb11 bus 10
ppb12 at pci0 dev 7 function 0 vendor "Intel", unknown product 0x2607 rev 0x10
pci13 at ppb12 bus 11
pchb1 at pci0 dev 8 function 0 vendor "Intel", unknown product 0x260c rev 0x10
vendor "Intel", unknown product 0x2620 (class memory subclass RAM, rev 0x10) at pci0 dev
9 function 0 not configured
vendor "Intel", unknown product 0x2621 (class memory subclass RAM, rev 0x10) at pci0 dev
9 function 1 not configured
vendor "Intel", unknown product 0x2622 (class memory subclass RAM, rev 0x10) at pci0 dev
9 function 2 not configured
vendor "Intel", unknown product 0x2623 (class memory subclass RAM, rev 0x10) at pci0 dev
9 function 3 not configured
vendor "Intel", unknown product 0x2624 (class memory subclass RAM, rev 0x10) at pci0 dev
9 function 4 not configured
vendor "Intel", unknown product 0x2625 (class memory subclass RAM, rev 0x10) at pci0 dev
9 function 5 not configured
vendor "Intel", unknown product 0x2626 (class memory subclass RAM, rev 0x10) at pci0 dev
9 function 6 not configured
vendor "Intel", unknown product 0x2627 (class memory subclass RAM, rev 0x10) at pci0 dev
9 function 7 not configured
pchb2 at pci0 dev 10 function 0 vendor "Intel", unknown product 0x260c rev 0x10
vendor "Intel", unknown product 0x2620 (class memory subclass RAM, rev 0x10) at pci0 dev
11 function 0 not configured
vendor "Intel", unknown product 0x2621 (class memory subclass RAM, rev 0x10) at pci0 dev
11 function 1 not configured
vendor "Intel", unknown product 0x2622 (class memory subclass RAM, rev 0x10) at pci0 dev
11 function 2 not configured
vendor "Intel", unknown product 0x2623 (class memory subclass RAM, rev 0x10) at pci0 dev
11 function 3 not configured
vendor "Intel", unknown product 0x2624 (class memory subclass RAM, rev 0x10) at pci0 dev
11 function 4 not configured
vendor "Intel", unknown product 0x2625 (class memory subclass RAM, rev 0x10) at pci0 dev
11 function 5 not configured
vendor "Intel", unknown product 0x2626 (class memory subclass RAM, rev 0x10) at pci0 dev
11 function 6 not configured
vendor "Intel", unknown product 0x2627 (class memory subclass RAM, rev 0x10) at pci0 dev
11 function 7 not configured
pchb3 at pci0 dev 12 function 0 vendor "Intel", unknown product 0x260c rev 0x10
vendor "Intel", unknown product 0x2620 (class memory subclass RAM, rev 0x10) at pci0 dev
13 function 0 not configured
vendor "Intel", unknown product 0x2621 (class memory subclass RAM, rev 0x10) at pci0 dev
13 function 1 not configured
vendor "Intel", unknown product 0x2622 (class memory subclass RAM, rev 0x10) at pci0 dev
13 function 2 not configured
vendor "Intel", unknown product 0x2623 (class memory subclass RAM, rev 0x10) at pci0 dev
13 function 3 not configured
vendor "Intel", unknown product 0x2624 (class memory subclass RAM, rev 0x10) at pci0 dev
13 function 4 not configured
vendor "Intel", unknown product 0x2625 (class memory subclass RAM, rev 0x10) at pci0 dev
13 function 5 not configured
vendor "Intel", unknown product 0x2626 (class memory subclass RAM, rev 0x10) at pci0 dev
13 function 6 not configured
vendor "Intel", unknown product 0x2627 (class memory subclass RAM, rev 0x10) at pci0 dev
13 function 7 not configured
pchb4 at pci0 dev 14 function 0 vendor "Intel", unknown product 0x260c rev 0x10
vendor "Intel", unknown product 0x2620 (class memory subclass RAM, rev 0x10) at pci0 dev
15 function 0 not configured
vendor "Intel", unknown product 0x2621 (class memory subclass RAM, rev 0x10) at pci0 dev
15 function 1 not configured
vendor "Intel", unknown product 0x2622 (class memory subclass RAM, rev 0x10) at pci0 dev
15 function 2 not configured
vendor "Intel", unknown product 0x2623 (class memory subclass RAM, rev 0x10) at pci0 dev
15 function 3 not configured
vendor "Intel", unknown product 0x2624 (class memory subclass RAM, rev 0x10) at pci0 dev
15 function 4 not configured
vendor "Intel", unknown product 0x2625 (class memory subclass RAM, rev 0x10) at pci0 dev
15 function 5 not configured
vendor "Intel", unknown product 0x2626 (class memory subclass RAM, rev 0x10) at pci0 dev
15 function 6 not configured
vendor "Intel", unknown product 0x2627 (class memory subclass RAM, rev 0x10) at pci0 dev
15 function 7 not configured
pchb5 at pci0 dev 16 function 0 vendor "Intel", unknown product 0x2610 rev 0x10
pchb6 at pci0 dev 16 function 1 vendor "Intel", unknown product 0x2611 rev 0x10
pchb7 at pci0 dev 16 function 2 vendor "Intel", unknown product 0x2612 rev 0x10
pchb8 at pci0 dev 17 function 0 vendor "Intel", unknown product 0x2613 rev 0x10
pchb9 at pci0 dev 17 function 1 vendor "Intel", unknown product 0x2614 rev 0x10
pchb10 at pci0 dev 17 function 2 vendor "Intel", unknown product 0x2615 rev 0x10
pchb11 at pci0 dev 19 function 0 vendor "Intel", unknown product 0x2617 rev 0x10
pchb12 at pci0 dev 19 function 1 vendor "Intel", unknown product 0x2618 rev 0x10
pchb13 at pci0 dev 19 function 2 vendor "Intel", unknown product 0x2619 rev 0x10
pchb14 at pci0 dev 19 function 3 vendor "Intel", unknown product 0x261a rev 0x10
pchb15 at pci0 dev 19 function 4 vendor "Intel", unknown product 0x261b rev 0x10
pchb16 at pci0 dev 19 function 5 vendor "Intel", unknown product 0x261c rev 0x10
pchb17 at pci0 dev 19 function 6 vendor "Intel", unknown product 0x261d rev 0x10
pchb18 at pci0 dev 19 function 7 vendor "Intel", unknown product 0x261e rev 0x10
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 7
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 10
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci14 at ppb13 bus 12
"Compaq iLO" rev 0x01 at pci14 dev 2 function 0 not configured
"Compaq iLO" rev 0x01 at pci14 dev 2 function 2 not configured
"ATI Rage XL" rev 0x27 at pci14 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-28E-C, B.4F> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1
pciide0: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efe5 netmask efe5 ttymask ffe7
pctr: user-level cycle counter enabled
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: HP Virtual Management Device, rev 1.10/0.01, addr 2, iclass 3/1
ums0 at uhidev0
ums0: X report 0x0002 not supported
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0
ciss0: cmd_stat 2 scsi_stat 0x0 |
| Back to overview | | Hardware configuration: | HP Proliant DL145 G2 | | OpenBSD version tested: | 3.8 | | OpenBSD support: | Partial | | Disk system: | SATA, SCSI | | Notes (OpenBSD): | On-board nVidia SATA controller has performance issues. Writing into
files with dd shows around 6MB/sec throughput.
Bug report:
http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=4613
Update: 27/09/2006. Apperantly, write-cache is disabled by default on
this machine, hence the slow performance. Use "atactl wd0
writecacheenable" to enable it. Thanks Stuart Henderson for the tip.
See
http://marc.theaimsgroup.com/?l=openbsd-bugs&m=115927462427970&w=2
for details.
SCSI model does not work at all, since OpenBSD can't detect the
PCI-riser board in this machine. Unfortunately, LSI1030 SCSI
controller is seated in this slot.
Bug report:
http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=4301 | | Availability: | Available | | Last changed: | September 27, 2006, 3:09 am | dmesg: OpenBSD 3.8 (GENERIC) #247: Sat Sep 10 15:53:26 MDT 2005
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1072398336 (1047264K)
avail mem = 908378112 (887088K)
using 22937 buffers containing 107446272 bytes (104928K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 246, 2009.53 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LO
NG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
"Nvidia nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured
"Nvidia nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 2 function 1 "Nvidia nForce4 USB" rev 0xa3: irq 11
ehci0: timed out waiting for BIOS
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Nvidia EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configu
red to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xa3: DMA
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6L080M0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 12 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 11 address 00:14:38:a7:35:b6
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 13 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 10 address 00:14:38:a7:35:b7
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302 |
| Back to overview | | Hardware configuration: | IBM xServer 3455 | | OpenBSD version tested: | 4.0-RELEASE | | OpenBSD support: | Full | | Disk system: | SATA | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD/amd64 install. | | Availability: | Available | | Last changed: | November 15, 2006, 3:11 am | dmesg: OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3488210944 (3406456K)
avail mem = 2990272512 (2920188K)
using 22937 buffers containing 349028352 bytes (340848K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xcff6c000 (51 entries)
bios0: IBM IBM System x3455-[798452Y]-
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (BRCM EXPLOSION )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2218, 2593.84 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 2218, 2593.50 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Dual-Core AMD Opteron(tm) Processor 2218, 2593.50 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Dual-Core AMD Opteron(tm) Processor 2218, 2593.50 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type ISA
ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 5 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 6 pa 0xfec02000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xc0
pci2 at ppb1 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 5
int 2 (irq 11), address 00:14:5e:55:13:7f
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 5
int 1 (irq 5), address 00:14:5e:55:13:80
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pciide0 at pci1 dev 14 function 0 "ServerWorks HT-1000 SATA" rev 0x00: DMA
pciide0: using apic 4 int 7 (irq 7) for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <WDC WD800JD-23LSA0>
wd0: 16-sector PIO, LBA48, 76324MB, 156312576 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: port 1: PHY offline
pciide0: port 2: PHY offline
pciide0: port 3: PHY offline
piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
iic0 at piixpm0: disabled to avoid ipmi0 interactions
pciide1 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 10 (irq
10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 10 (irq
10), version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 10 (irq
10)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vga1 at pci0 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 6 function 0 vendor "ServerWorks", unknown product 0x0140 rev 0xa2
pci3 at ppb2 bus 3
ppb3 at pci0 dev 7 function 0 vendor "ServerWorks", unknown product 0x0142 rev 0xa2
pci4 at ppb3 bus 4
ppb4 at pci0 dev 8 function 0 vendor "ServerWorks", unknown product 0x0144 rev 0xa2
pci5 at ppb4 bus 5
ppb5 at pci0 dev 9 function 0 vendor "ServerWorks", unknown product 0x0142 rev 0xa2
pci6 at ppb5 bus 6
ppb6 at pci0 dev 10 function 0 vendor "ServerWorks", unknown product 0x0144 rev 0xa2
pci7 at ppb6 bus 7
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub3 at uhub2 port 3
uhub3: Standard Microsystems product 0x2504, rev 2.00/0.01, addr 2
uhub3: 4 ports with 4 removable, self powered, multiple transaction translators
uhidev0 at uhub3 port 3 configuration 1 interface 0
uhidev0: DELL DELL USB Keyboard, rev 1.10/1.04, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302 |
| Back to overview | | Hardware configuration: | IBM xServer 336 | | OpenBSD version tested: | 3.9-{RELEASE,CURRENT} | | OpenBSD support: | Full | | Disk system: | SCSI | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD/amd64 install. Box
has 5GB of RAM. OpenBSD/amd64 only reports 3.5GB.
OpenBSD/i386 has problems with IRQ routning and simply reboots shortly
after spinning up the CPU. Workaround is to disable pcibios. Latest
-current kernel compiled with option I686_PAE reports all the RAM
(see the last dmesg). | | Availability: | Available | | Last changed: | May 26, 2006, 3:05 am | dmesg: OpenBSD 3.9 (GENERIC.MP) #736: Thu Mar 2 04:02:03 MST 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3623260160 (3538340K)
avail mem = 3108069376 (3035224K)
using 22937 buffers containing 362532864 bytes (354036K) of memory
mainbus0 (root)
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (IBM ENSW X336 SMP )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.56 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG
cpu0: 1MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type ISA
ioapic0 at mainbus0 apid 14: pa 0xffff800005d31e24, version 20, 24 pins
ioapic1 at mainbus0 apid 13: pa 0xffff800005d31d24, version 20, 24 pins
ioapic2 at mainbus0 apid 12: pa 0xffff800005d31c24, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0a
"Intel E7520 MCH ERR" rev 0x0a at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0a
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0a
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
mpt0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: apic 13 int 4 (irq 11)
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd0: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd1: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd2 at scsibus0 targ 2 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd2: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd3 at scsibus0 targ 3 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd3: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 2 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 3 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0a
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): apic 14
int 16 (irq 11), address 00:0d:60:9a:22:18
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel MCH PCIE" rev 0x0a
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): apic 14
int 16 (irq 11), address 00:0d:60:9a:22:19
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
"Intel E7525 MCH Configuration" rev 0x0a at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 16 (irq
11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 19 (irq 3)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 14 int 23 (irq
5)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 14 int 17 (irq
3)
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
dkcsum: sd3 matches BIOS drive 0x83
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 3.9-current (GENERIC) #804: Sat May 20 18:38:54 MDT 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
real mem = 3623227392 (3538308K)
avail mem = 3319156736 (3241364K)
using 4256 buffers containing 181264384 bytes (177016K) of memory
User Kernel Config
UKC> disable pcibios
281 pcibios0 disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/16/06, BIOS32 rev. 0 @ 0xfd6f1, SMBIOS rev.
2.3 @ 0xf5eea (50 entries)
bios0: IBM eserver xSeries 336 -[88372AY
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1600 0xcc600/0x1600 0xcdc00/0x4000
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0a
"Intel E7520 MCH ERR" rev 0x0a at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0a
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0a
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
mpt0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: irq 11
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd0: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd1: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd2 at scsibus0 targ 2 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd2: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd3 at scsibus0 targ 3 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd3: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 2 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 3 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0a
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): irq 11,
address 00:0d:60:9a:22:18
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel MCH PCIE" rev 0x0a
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): irq 11,
address 00:0d:60:9a:22:19
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
"Intel E7525 MCH Configuration" rev 0x0a at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
dkcsum: sd3 matches BIOS drive 0x83
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 3.9-current (GENERIC.PAE) #0: Tue May 23 10:54:17 CEST 2006
root@x336.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
real mem = 5368057856 (5242244K)
avail mem = 3203022848 (3127952K)
using 4256 buffers containing 268505088 bytes (262212K) of memory
User Kernel Config
UKC> disable pcibios
281 pcibios0 disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/16/06, BIOS32 rev. 0 @ 0xfd6f1, SMBIOS rev.
2.3 @ 0xf5eea (50 entries)
bios0: IBM eserver xSeries 336 -[88372AY
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1600 0xcc600/0x1600 0xcdc00/0x4000
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0a
"Intel E7520 MCH ERR" rev 0x0a at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0a
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0a
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
mpt0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: irq 11
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd0: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd1: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd2 at scsibus0 targ 2 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd2: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd3 at scsibus0 targ 3 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd3: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 2 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 3 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0a
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): irq 11,
address 00:0d:60:9a:22:18
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel MCH PCIE" rev 0x0a
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): irq 11,
address 00:0d:60:9a:22:19
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
"Intel E7525 MCH Configuration" rev 0x0a at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
dkcsum: sd3 matches BIOS drive 0x83
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | IBM eServer 326m | | OpenBSD version tested: | 3.9-RELEASE | | OpenBSD support: | Full | | Disk system: | SCSI/SATA | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD/amd64 install.
However, OpenBSD/i386 panics on install in bge_intr routine.
Bug report:
http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=5114
SATA version was not tested, but is reported to work fine. | | Availability: | Available | | Last changed: | May 26, 2006, 3:05 am | dmesg: OpenBSD 3.9 (GENERIC.MP) #736: Thu Mar 2 04:02:03 MST 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146410496 (2096104K)
avail mem = 1835237376 (1792224K)
using 22937 buffers containing 214847488 bytes (209812K) of memory
mainbus0 (root)
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca2/2 spacing 1
mainbus0: Intel MP Specification (Version 1.4) (AMD HAMMER )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 275, 2194.90 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 275, 2194.50 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type PCI
mpbios: bus 9 is type ISA
ioapic0 at mainbus0 apid 4: pa 0xffff80000373ae24, version 11, 16 pins
ioapic1 at mainbus0 apid 5: pa 0xffff80000373ad24, version 11, 16 pins
ioapic2 at mainbus0 apid 6: pa 0xffff80000373ac24, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci2 at ppb1 bus 2
mpt0 at pci2 dev 3 function 0 "Symbios Logic 53c1030" rev 0x08: apic 5 int 2 (irq 11)
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, MAX3036NC FN, CA06> SCSI4 0/direct fixed
sd0: 34715MB, 49158 cyl, 2 head, 723 sec, 512 bytes/sec, 71096640 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 127 QAS 0 DT 1 IU 1
pchb0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00
pciide0 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.06> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 0
pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 10 (irq
10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 10 (irq
10), version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 4 int 10 (irq
10)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vga1 at pci0 dev 4 function 0 "ATI ES1000" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 6 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 7 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci4 at ppb3 bus 4
bge0 at pci4 dev 4 function 0 "Broadcom BCM5780" rev 0x03, BCM5714 B3 (0x8003): apic 5
int 10 (irq 7), address 00:11:25:c4:48:a6
brgphy0 at bge0 phy 1: BCM5780 10/100/1000baseT PHY, rev. 0
bge1 at pci4 dev 4 function 1 "Broadcom BCM5780" rev 0x03, BCM5714 B3 (0x8003): apic 5
int 11 (irq 12), address 00:11:25:c4:48:a7
brgphy1 at bge1 phy 1: BCM5780 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 8 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci5 at ppb4 bus 5
ppb5 at pci0 dev 9 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci6 at ppb5 bus 6
ppb6 at pci0 dev 10 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci7 at ppb6 bus 7
ppb7 at pci0 dev 11 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci8 at ppb7 bus 8
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: DELL DELL USB Keyboard, rev 1.10/1.04, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | IBM eServer 325 | | OpenBSD version tested: | 3.7-current | | OpenBSD support: | Full | | Disk system: | SCSI | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install. | | Availability: | Model discontinued by manufacturer | | Last changed: | June 1, 2005, 1:06 am | dmesg: OpenBSD 3.7-current (GENERIC.MP) #344: Mon May 2 22:08:07 MDT 2005
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3220217856 (3144744K)
avail mem = 2759090176 (2694424K)
using 22937 buffers containing 322228224 bytes (314676K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (AMD HAMMER )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 246, 1994.04 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199378221Hz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Opteron(tm) Processor 246, 1993.78 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xffff800005426e24, version 11, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xffff800005426d24, version 11, 4 pins
ioapic2 at mainbus0 apid 4: pa 0xffff800005426c24, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 2 int 19 (irq 11), version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 2 int 19 (irq 11), version
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci1 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"AMD AMD8111 LPC" rev 0x05 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 configured to
compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8245B, 1.16> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"AMD 8111 ACPI" rev 0x05 at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x03, BCM5704 A3 (0x2003): apic 3
int 0 (irq 10) address 00:0d:60:14:17:6e
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x03, BCM5704 A3 (0x2003): apic 3
int 1 (irq 7) address 00:0d:60:14:17:6f
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
mpt0 at pci2 dev 2 function 0 "Symbios Logic 53c1030" rev 0x07: apic 3 int 2 (irq 3)
mpt0: sending FW Upload request to IOC (size: 36, img size: 67560)
mpt0: IM support: 4
scsibus1 at mpt0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <IBM-ESXS, DTN036C3UCDY10FN, S27P> SCSI3 0/direct fixed
sd0: 34715MB, 36703 cyl, 3 head, 645 sec, 512 bytes/sec, 71096640 sec total
sd1 at scsibus1 targ 1 lun 0: <IBM-ESXS, DTN036C3UCDY10FN, S27P> SCSI3 0/direct fixed
sd1: 34715MB, 36703 cyl, 3 head, 645 sec, 512 bytes/sec, 71096640 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 10 function 1 not configured
ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 11 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: CHICONY HP Basic USB Keyboard, rev 1.10/3.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: sd0 matched BIOS disk 80
dkcsum: sd1 matched BIOS disk 81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
cpu1: CPU 1 running
|
| Back to overview | | Hardware configuration: | Sun SunFire x4200 | | OpenBSD version tested: | 4.1 | | OpenBSD support: | Full | | Disk system: | SCSI | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install. | | Availability: | Available | | Last changed: | January 13, 2008, 6:01 am | dmesg: OpenBSD 4.1-stable (GENERIC.MP) #1: Sat Jul 28 17:09:07 CEST 2007
root@dev-5-i386.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Dual Core AMD Opteron(tm) Processor 280 ("AuthenticAMD" 686-class, 1024KB L2
cache) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3
cpu0: AMD erratum 89 present, BIOS upgrade may be required
real mem = 4160249856 (4062744K)
avail mem = 3821740032 (3732168K)
using 4278 buffers containing 208138240 bytes (203260K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 08/10/05, SMBIOS rev. 2.3 @ 0xf8fb0 (65 entries)
bios0: Sun Microsystems Sun Fire X4200 Server
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xa000 0xca000/0x1000 0xcb000/0x1000 0xcc000/0x1000
0xcd000/0x1000 0xce000/0x4800 0xd2800/0x1000
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 280 ("AuthenticAMD" 686-class, 1024KB L2
cache) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3
cpu1: AMD erratum 89 present, BIOS upgrade may be required
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Dual Core AMD Opteron(tm) Processor 280 ("AuthenticAMD" 686-class, 1024KB L2
cache) 2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3
cpu2: AMD erratum 89 present, BIOS upgrade may be required
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Dual Core AMD Opteron(tm) Processor 280 ("AuthenticAMD" 686-class, 1024KB L2
cache) 2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3
cpu3: AMD erratum 89 present, BIOS upgrade may be required
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfe6ff000, version 11, 4 pins
ioapic2 at mainbus0: apid 6 pa 0xfe6fe000, version 11, 4 pins
ioapic3 at mainbus0: apid 7 pa 0xfeaff000, version 11, 4 pins
ioapic4 at mainbus0: apid 8 pa 0xfeafe000, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
ppb0 at pci0 dev 1 function 0 "AMD 8131 PCIX" rev 0x13
pci1 at ppb0 bus 1
em0 at pci1 dev 1 function 0 "Intel PRO/1000MT (82546EB)" rev 0x03: apic 5 int 2 (irq
10), address 00:14:4f:40:0a:e4
em1 at pci1 dev 1 function 1 "Intel PRO/1000MT (82546EB)" rev 0x03: apic 5 int 3 (irq
11), address 00:14:4f:40:0a:e5
em2 at pci1 dev 2 function 0 "Intel PRO/1000MT (82546EB)" rev 0x03: apic 5 int 0 (irq
11), address 00:14:4f:40:0a:e6
em3 at pci1 dev 2 function 1 "Intel PRO/1000MT (82546EB)" rev 0x03: apic 5 int 1 (irq
9), address 00:14:4f:40:0a:e7
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 1 function 1 not configured
ppb1 at pci0 dev 2 function 0 "AMD 8131 PCIX" rev 0x13
pci2 at ppb1 bus 2
mpi0 at pci2 dev 3 function 0 "Symbios Logic SAS1064" rev 0x02: apic 6 int 0 (irq 11)
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed
sd0: 69618MB, 69618 cyl, 16 head, 128 sec, 512 bytes/sec, 142577664 sec total
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 2 function 1 not configured
ppb2 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci3 at ppb2 bus 3
ohci0 at pci3 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 4 int 19 (irq 11), version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci3 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 4 int 19 (irq 11), version
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci3 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD 8111 LPC" rev 0x05
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 configured to
compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DZ13> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
amdiic0 at pci0 dev 7 function 2 "AMD 8111 SMBus" rev 0x02: SCI
iic0 at amdiic0: disabled to avoid ipmi0 interactions
amdpm0 at pci0 dev 7 function 3 "AMD 8111 Power" rev 0x05: rng active
iic1 at amdpm0: disabled to avoid ipmi0 interactions
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pci4 at pchb0 bus 4
ppb3 at pci4 dev 1 function 0 "AMD 8131 PCIX" rev 0x13
pci5 at ppb3 bus 5
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 1 function 1 not configured
ppb4 at pci4 dev 2 function 0 "AMD 8131 PCIX" rev 0x13
pci6 at ppb4 bus 6
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci4 dev 2 function 1 not configured
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pctr: user-level cycle counter enabled
uhidev0 at uhub0 port 3 configuration 1 interface 0
uhidev0: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, addr 2,
iclass 3/1
umass0 at uhub1 port 1 configuration 1 interface 0ukbd0 at uhidev0: 8 modifier keys, 6
key codes
umass0: American Megatrends Inc. Virtual Cdrom Device, rev 1.10/1.00, addr 2
umass0: using ATAPI over Bulk-Only
scsibus2 at umass0: 2 targets
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 1
uhidev1: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, addr 2,
iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
cd1 at scsibus2 targ 1 lun 0: <AMI, Virtual CDROM, 1.00> SCSI0 5/cdrom removable
umass1 at uhub1 port 2 configuration 1 interface 0
umass1: American Megatrends Inc. Virtual Floppy Device, rev 1.10/1.00, addr 3
umass1: using UFI over CBI with CCI
scsibus3 at umass1: 2 targets
sd1 at scsibus3 targ 1 lun 0: <AMI, Virtual Floppy, 1.00> SCSI0 0/direct removable
sd1: drive offline
uhub2 at uhub1 port 3
uhub2: Atmel UHB124 hub, rev 1.10/3.00, addr 4
uhub2: 4 ports with 4 removable, self powered
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | Sun SunFire v40z | | OpenBSD version tested: | 3.8 | | OpenBSD support: | Full | | Disk system: | SCSI | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install.
The box we had for test had 8GB of RAM, but OpenBSD can only address
4GB. | | Availability: | Available | | Last changed: | December 19, 2005, 3:12 am | dmesg: OpenBSD 3.8 (GENERIC.MP) #504: Sat Sep 10 16:02:38 MDT 2005
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3824197632 (3734568K)
avail mem = 3282997248 (3206052K)
using 22937 buffers containing 382627840 bytes (373660K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (SUN SunFire V40z)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 848, 2191.76 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199218771Hz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Opteron(tm) Processor 848, 2191.41 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Opteron(tm) Processor 848, 2191.41 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Opteron(tm) Processor 848, 2191.41 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 32 is type PCI
mpbios: bus 33 is type PCI
mpbios: bus 37 is type PCI
mpbios: bus 41 is type PCI
mpbios: bus 45 is type PCI
mpbios: bus 49 is type ISA
ioapic0 at mainbus0 apid 4: pa 0xffff800006263f24, version 11, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xffff800006263e24, version 11, 4 pins
ioapic2 at mainbus0 apid 6: pa 0xffff800006263d24, version 11, 4 pins
ioapic3 at mainbus0 apid 7: pa 0xffff800006263c24, version 11, 4 pins
ioapic4 at mainbus0 apid 8: pa 0xffff800006263b24, version 11, 4 pins
ioapic5 at mainbus0 apid 9: pa 0xffff800006263a24, version 11, 4 pins
ioapic6 at mainbus0 apid 10: pa 0xffff800006263924, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 4 int 19
(irq 11), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 4 int 19
(irq 11), version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci1 dev 5 function 0 "Trident Blade 3D" rev 0x3a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"AMD AMD8111 LPC" rev 0x05 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DV-28E-C, 1.4B> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"AMD 8111 ACPI" rev 0x05 at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): apic 5 int 1 (irq 5) address 00:09:3d:00:bb:4c
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1 at pci2 dev 3 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
(0x1002): apic 5 int 2 (irq 7) address 00:09:3d:00:bb:4d
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
mpt0 at pci2 dev 4 function 0 "Symbios Logic 53c1030" rev 0x07: apic 5
int 3 (irq 11)
mpt0: sending FW Upload request to IOC (size: 36, img size: 69448)
mpt0: IM support: 6
scsibus1 at mpt0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST373307LC, 0007> SCSI3 0/direct fixed
sd0: 70007MB, 49855 cyl, 4 head, 718 sec, 512 bytes/sec, 143374744 sec total
sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST373307LC, 0007> SCSI3 0/direct fixed
sd1: 70007MB, 49855 cyl, 4 head, 718 sec, 512 bytes/sec, 143374744 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
aapic0 at pci0 dev 10 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
aapic1 at pci0 dev 11 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb8 at pci0 dev 26 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb9 at pci0 dev 26 function 1 "AMD AMD64 Address Map" rev 0x00
pchb10 at pci0 dev 26 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb11 at pci0 dev 26 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb12 at pci0 dev 27 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb13 at pci0 dev 27 function 1 "AMD AMD64 Address Map" rev 0x00
pchb14 at pci0 dev 27 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb15 at pci0 dev 27 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 |
| Back to overview | | Hardware configuration: | Sun SunFire v20z | | OpenBSD version tested: | 3.6 | | OpenBSD support: | Full | | Disk system: | SCSI | | Notes (OpenBSD): | No modifications necessary to run a stock OpenBSD install. | | Availability: | Model discontinued by manufacturer | | Last changed: | April 20, 2006, 12:04 pm | dmesg: OpenBSD 3.6 (RAMDISK_CD) #362: Fri Aug 27 11:52:20 MDT 2004
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Opteron(tm) Processor 248 ("AuthenticAMD" 686-class) 2.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2
real mem = 2146455552 (2096148K)
avail mem = 1953603584 (1907816K)
using 4278 buffers containing 107425792 bytes (104908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ac) BIOS, date 05/17/04, BIOS32 rev. 0 @ 0xfd6f2
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/240 (13 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1022 product 0x746b
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x1800 0xcb000/0x4000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 11, version 1.0, legacy
support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 11, version 1.0, legacy
support
ohci1: SMM does not respond, resetting
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci1 dev 5 function 0 "Trident Blade 3D" rev 0x3a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD AMD8111 LPC" rev 0x05
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 configured to
compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.9A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"AMD 8111 ACPI" rev 0x05 at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02: irq 5 address
00:09:3d:00:9e:ea
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1 at pci2 dev 3 function 0 "Broadcom BCM5703X" rev 0x02: irq 3 address
00:09:3d:00:9e:eb
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
mpt0 at pci2 dev 4 function 0 "Symbios Logic 53c1030" rev 0x07: irq 11
mpt0: sending FW Upload request to IOC (size: 36, img size: 69448)
scsibus1 at mpt0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST3146807LC, 0007> SCSI3 0/direct fixed
sd0: 140014MB, 49855 cyl, 8 head, 718 sec, 512 bytes/sec, 286749488 sec total
sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST3146807LC, 0007> SCSI3 0/direct fixed
sd1: 140014MB, 49855 cyl, 8 head, 718 sec, 512 bytes/sec, 286749488 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 10 function 1 not configured
ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 11 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffc5 netmask ffed ttymask ffef
rd0: fixed, 3560 blocks
dkcsum: warning: dup BSD->BIOS disk mapping
dkcsum: warning: dup BSD->BIOS disk mapping
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 |
| Back to overview | | Hardware configuration: | Sun SunFire x2100 | | OpenBSD version tested: | 3.9-{STABLE,CURRENT} | | OpenBSD support: | Partial | | Disk system: | SATA | | Notes (OpenBSD): | 1) with GENERIC.MP (both -STABLE and -CURRENT), X2100 will boot,
finish the init and then reboot within few minutes; sometimes, almost
instantly, other times after a few minutes. Seems to be related to MP
kernels. My first explanation was that this could be related to the
below message or general interrupt routning issues with MP kernels
and NVIDIA chipsets. BIOS revision was 1.0.9 (latest at the time)
ioapic0 at mainbus0 apid 2: pa 0xffff800003738f24, version 11, 24
pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
ioapic0: conflicting map entries for pin 0
pci0 at mainbus0 bus 0: configuration mode 1
After some more testing/debugging, random reboots *sometimes*
disappear and the X2100 (both -STABLE and -CURRENT) seem to work just
fine. Kernels can be built, even a couple of "make build" runs can't
seem to provoke the random reboots.
Bug report:
http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=5111
UP kernels seem to work fine.
2) nfe(4) stops responding during stress-testing with netperf
(transmitter box, IBM e326m, bge0/gigabit)
(receiver box, Sun X2100, nfe0/gigabit)
(both connected to a Dell PowerConnect 2708 gigabit switch)
ssehic@e326m:/home/ssehic$ netperf -H x2100 -l 300 -- -s 64K -m 64K -M
64K -S 64K
TCP STREAM TEST to 192.168.0.61
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
65536 65536 65536 300.01 936.58
(transmitter: 6K/interrupts seconds on bge0, 50% system idle)
(receiver: 83K/interrupts seconds on nfe0, 3% system idle)
All fine. Stress test runs for 300 seconds without a problem.
Now, we try the same test, but we increase the remote socket (nfe0)
send/recv buffer size to 256K.
ssehic@e326m:/home/ssehic$ netperf -H x2100 -l 300 -- -s 256K -m 64K
-M 64K -S 256K
(transmitter: 6K/interrupts seconds on bge0, 50% system idle)
(receiver: 100K/interrupts seconds on nfe0, 50% system idle)
nfe0 will stop responding after few seconds; tcpdump shows nothing;
ifconfig down/up doesn't help; only a reboot does.
Bug report:
http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=5108
3) iic(4) can't recognize the hardware sensors and displays:
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0 "unknown" at iic0 addr 0x2e not configured
iic1 at nviic0 "unknown" at iic1 addr 0x2e not configured
However, -current (from 09/05/2006), recognizes the hardware sensors
as adt(4). Output below. Notice, that it has detected 2 x adt(4)
sensors both providing the same data:
# sysctl hw.sensors
hw.sensors.0=adt0, +5VTR, 2.58 V DC
hw.sensors.1=adt0, Vccp, 1.37 V DC
hw.sensors.2=adt0, Vcc, 3.32 V DC
hw.sensors.3=adt0, +5V, 5.03 V DC
hw.sensors.4=adt0, +12V, 11.75 V DC
hw.sensors.5=adt0, Remote1 Temp, 53.00 degC
hw.sensors.6=adt0, Internal Temp, 36.00 degC
hw.sensors.7=adt0, Remote2 Temp, 33.00 degC
hw.sensors.8=adt0, TACH1, 9424 RPM
hw.sensors.9=adt0, TACH2, 4584 RPM
hw.sensors.10=adt0, TACH3, 4295 RPM
hw.sensors.11=adt0, TACH4, 9642 RPM
hw.sensors.12=adt1, +5VTR, 2.58 V DC
hw.sensors.13=adt1, Vccp, 1.37 V DC
hw.sensors.14=adt1, Vcc, 3.32 V DC
hw.sensors.15=adt1, +5V, 5.03 V DC
hw.sensors.16=adt1, +12V, 11.75 V DC
hw.sensors.17=adt1, Remote1 Temp, 53.00 degC
hw.sensors.18=adt1, Internal Temp, 36.00 degC
hw.sensors.19=adt1, Remote2 Temp, 33.00 degC
hw.sensors.20=adt1, TACH1, 9424 RPM
hw.sensors.21=adt1, TACH2, 4584 RPM
hw.sensors.22=adt1, TACH3, 4295 RPM
hw.sensors.23=adt1, TACH4, 9642 RPM | | Availability: | Available | | Last changed: | October 6, 2006, 1:10 am | dmesg: OpenBSD 3.9-stable (GENERIC.MP) #0: Tue May 9 14:55:51 CEST 2006
root@x2100.lab.armorlogic.com:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145873920 (2095580K)
avail mem = 1834766336 (1791764K)
using 22937 buffers containing 214794240 bytes (209760K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 175, 2211.58 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 201MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 175, 2211.33 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xffff800003738f24, version 11, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
ioapic0: conflicting map entries for pin 0
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
"unknown" at iic0 addr 0x2e not configured
iic1 at nviic0
"unknown" at iic1 addr 0x2e not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int 10 (irq 10),
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 2 int 11 (irq 11)
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PZ16> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA 1" rev 0xf3: DMA
pciide1: using apic 2 int 11 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HDS728080PLA380>
wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA 2" rev 0xf3: DMA
pciide2: using apic 2 int 10 (irq 10) for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 2 int 3 (irq 3),
address 00:e0:81:58:b1:10
eephy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 5 (irq 5), address 00:e0:81:58:b1:11
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: DELL DELL USB Keyboard, rev 1.10/1.04, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
OpenBSD 3.9-current (GENERIC.MP) #0: Tue May 9 18:26:08 CEST 2006
root@x2100.lab.armorlogic.com:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145873920 (2095580K)
avail mem = 1834684416 (1791684K)
using 22937 buffers containing 214794240 bytes (209760K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (40 entries)
bios0: Sun Microsystems Sun Fire(TM) X2100
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 175, 2211.58 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 201MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 175, 2211.33 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2
cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic0: conflicting map entries for pin 0
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
adt0 at iic0 addr 0x2e: sch5017 rev 0x89
iic1 at nviic0
adt1 at iic1 addr 0x2e: sch5017 rev 0x89
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int 10 (irq 10),
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 2 int 11 (irq 11)
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PZ16> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide1: using apic 2 int 11 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HDS728080PLA380>
wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide2: using apic 2 int 10 (irq 10) for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 2 int 3 (irq 3),
address 00:e0:81:58:b1:10
eephy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 5 (irq 5), address 00:e0:81:58:b1:11
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhidev0 at uhub0 port 6 configuration 1 interface 0
uhidev0: DELL DELL USB Keyboard, rev 1.10/1.04, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302 |
|
