Armorlogic - provider of Profense - The automated web application firewall Profense - the automated web application firewall software
TRY | BUY | DOWNLOAD | PRODUCTS | SUPPORT | COMPANY | HOME

Support

Support offerings

Support Forum

MyAccount

Profense documentation

OpenBSD information

Support > OpenBSD information > Server compatibility list

Server compatibility list

« Server testing | About Armorlogic »

For an explanation of the list below and the usual disclaimer please read the server testing information.

Contributions, comments or questions to the OSCL: e-mail openbsd _at_ armorlogic.com

Back to overview
Hardware configuration:IBM xServer 336
OpenBSD version tested:3.9-{RELEASE,CURRENT}
OpenBSD support:Full
Disk system:SCSI
Notes (OpenBSD):
No modifications necessary to run a stock OpenBSD/amd64 install. Box
has 5GB of RAM. OpenBSD/amd64 only reports 3.5GB.

OpenBSD/i386 has problems with IRQ routning and simply reboots shortly
after spinning up the CPU. Workaround is to disable pcibios. Latest
-current kernel compiled with option I686_PAE reports all the RAM
(see the last dmesg).
Availability:Available
Last changed:May 26, 2006, 3:05 am

dmesg:

OpenBSD 3.9 (GENERIC.MP) #736: Thu Mar  2 04:02:03 MST 2006
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3623260160 (3538340K)
avail mem = 3108069376 (3035224K)
using 22937 buffers containing 362532864 bytes (354036K) of memory
mainbus0 (root)
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (IBM ENSW X336 SMP    )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.56 MHz
cpu0:
  FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
  MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG
cpu0: 1MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type PCI   
mpbios: bus 3 is type PCI   
mpbios: bus 4 is type PCI   
mpbios: bus 5 is type PCI   
mpbios: bus 6 is type PCI   
mpbios: bus 7 is type PCI   
mpbios: bus 8 is type ISA   
ioapic0 at mainbus0 apid 14: pa 0xffff800005d31e24, version 20, 24 pins
ioapic1 at mainbus0 apid 13: pa 0xffff800005d31d24, version 20, 24 pins
ioapic2 at mainbus0 apid 12: pa 0xffff800005d31c24, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0a
"Intel E7520 MCH ERR" rev 0x0a at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0a
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0a
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
mpt0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: apic 13 int 4 (irq 11)
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd0: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd1: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd2 at scsibus0 targ 2 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd2: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd3 at scsibus0 targ 3 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd3: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 2 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 3 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0a
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): apic 14
  int 16 (irq 11), address 00:0d:60:9a:22:18
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel MCH PCIE" rev 0x0a
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): apic 14
  int 16 (irq 11), address 00:0d:60:9a:22:19
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
"Intel E7525 MCH Configuration" rev 0x0a at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 16 (irq
  11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 19 (irq 3)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 14 int 23 (irq
  5)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
  configured to compatibility, channel 1 configured to compatibility
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 14 int 17 (irq
  3)
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
dkcsum: sd3 matches BIOS drive 0x83
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

OpenBSD 3.9-current (GENERIC) #804: Sat May 20 18:38:54 MDT 2006
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0:
  FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
  MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
real mem  = 3623227392 (3538308K)
avail mem = 3319156736 (3241364K)
using 4256 buffers containing 181264384 bytes (177016K) of memory
User Kernel Config
UKC> disable pcibios
281 pcibios0 disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/16/06, BIOS32 rev. 0 @ 0xfd6f1, SMBIOS rev.
  2.3 @ 0xf5eea (50 entries)
bios0: IBM eserver xSeries 336 -[88372AY
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1600 0xcc600/0x1600 0xcdc00/0x4000
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0a
"Intel E7520 MCH ERR" rev 0x0a at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0a
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0a
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
mpt0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: irq 11
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd0: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd1: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd2 at scsibus0 targ 2 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd2: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd3 at scsibus0 targ 3 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd3: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 2 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 3 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0a
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): irq 11,
  address 00:0d:60:9a:22:18
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel MCH PCIE" rev 0x0a
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): irq 11,
  address 00:0d:60:9a:22:19
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
"Intel E7525 MCH Configuration" rev 0x0a at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
  configured to compatibility, channel 1 configured to compatibility
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
dkcsum: sd3 matches BIOS drive 0x83
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

OpenBSD 3.9-current (GENERIC.PAE) #0: Tue May 23 10:54:17 CEST 2006
    root@x336.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0:
  FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
  MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
real mem  = 5368057856 (5242244K)
avail mem = 3203022848 (3127952K)
using 4256 buffers containing 268505088 bytes (262212K) of memory
User Kernel Config
UKC> disable pcibios
281 pcibios0 disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/16/06, BIOS32 rev. 0 @ 0xfd6f1, SMBIOS rev.
  2.3 @ 0xf5eea (50 entries)
bios0: IBM eserver xSeries 336 -[88372AY
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1600 0xcc600/0x1600 0xcdc00/0x4000
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0a
"Intel E7520 MCH ERR" rev 0x0a at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0a
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0a
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
mpt0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: irq 11
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd0: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd1: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd2 at scsibus0 targ 2 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd2: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
sd3 at scsibus0 targ 3 lun 0: <IBM-ESXS, ST936701LC FN, B41A> SCSI4 0/direct fixed
sd3: 34715MB, 51132 cyl, 2 head, 695 sec, 512 bytes/sec, 71096640 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 2 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpt0: target 3 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0a
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): irq 11,
  address 00:0d:60:9a:22:18
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel MCH PCIE" rev 0x0a
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x01, BCM5750 A1 (0x4001): irq 11,
  address 00:0d:60:9a:22:19
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
"Intel E7525 MCH Configuration" rev 0x0a at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
  configured to compatibility, channel 1 configured to compatibility
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: sd0 matches BIOS drive 0x80
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
dkcsum: sd3 matches BIOS drive 0x83
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
© 2005-2009 Armorlogic Contact us   |   Privacy   |   Legal   |   Home