Armorlogic - provider of Profense - The automated web application firewall Profense - the automated web application firewall software
TRY | BUY | DOWNLOAD | PRODUCTS | SUPPORT | COMPANY | HOME

Support > OpenBSD information > Server compatibility list

Server compatibility list

For an explanation of the list below and the usual disclaimer please read the server testing information.

Contributions, comments or questions to the OSCL: e-mail openbsd _at_ armorlogic.com

Back to overview
Hardware configuration:Sun SunFire v20z
OpenBSD version tested:3.6
OpenBSD support:Full
Disk system:SCSI
Notes (OpenBSD):
No modifications necessary to run a stock OpenBSD install.
Availability:Model discontinued by manufacturer
Last changed:April 20, 2006, 12:04 pm

dmesg:

OpenBSD 3.6 (RAMDISK_CD) #362: Fri Aug 27 11:52:20 MDT 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: AMD Opteron(tm) Processor 248 ("AuthenticAMD" 686-class) 2.20 GHz
cpu0:
  FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,
  SSE,SSE2
real mem  = 2146455552 (2096148K)
avail mem = 1953603584 (1907816K)
using 4278 buffers containing 107425792 bytes (104908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ac) BIOS, date 05/17/04, BIOS32 rev. 0 @ 0xfd6f2
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/240 (13 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1022 product 0x746b
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x1800 0xcb000/0x4000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 11, version 1.0, legacy
  support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 11, version 1.0, legacy
  support
ohci1: SMM does not respond, resetting
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci1 dev 5 function 0 "Trident Blade 3D" rev 0x3a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD AMD8111 LPC" rev 0x05
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 configured to
  compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.9A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"AMD 8111 ACPI" rev 0x05 at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02: irq 5 address
  00:09:3d:00:9e:ea
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
bge1 at pci2 dev 3 function 0 "Broadcom BCM5703X" rev 0x02: irq 3 address
  00:09:3d:00:9e:eb
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
mpt0 at pci2 dev 4 function 0 "Symbios Logic 53c1030" rev 0x07: irq 11
mpt0: sending FW Upload request to IOC (size: 36, img size: 69448)
scsibus1 at mpt0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST3146807LC, 0007> SCSI3 0/direct fixed
sd0: 140014MB, 49855 cyl, 8 head, 718 sec, 512 bytes/sec, 286749488 sec total
sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST3146807LC, 0007> SCSI3 0/direct fixed
sd1: 140014MB, 49855 cyl, 8 head, 718 sec, 512 bytes/sec, 286749488 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 10 function 1 not configured
ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 11 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffc5 netmask ffed ttymask ffef
rd0: fixed, 3560 blocks
dkcsum: warning: dup BSD->BIOS disk mapping
dkcsum: warning: dup BSD->BIOS disk mapping
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02