dmesg: OpenBSD 4.0 (GENERIC.MP) #936: Sat Sep 16 19:27:28 MDT 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
real mem = 1073053696 (1047904K)
avail mem = 970772480 (948020K)
using 4256 buffers containing 53755904 bytes (52496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/02/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev.
2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x4e00 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01E6 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: apic 2 int 16 (irq 5)
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 75340MB, 75340 cyl, 16 head, 128 sec, 512 bytes/sec, 154296320 sec total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 16 (irq 5), address 00:15:c5:f4:99:65
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 17 (irq 3), address 00:15:c5:f4:99:66
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: bus 0 dev
31 func 3 pin 2; line 3
pci_intr_map: no MP mapping found
: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask 0 netmask 0 ttymask 0
ioapic0: pin 16 shares different IPL interrupts (40..50), degraded performance
pctr: user-level cycle counter enabled
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1073086464 (1047936K)
avail mem = 907632640 (886360K)
using 22937 buffers containing 107515904 bytes (104996K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01E6 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.49 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.10 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: apic 2 int 16 (irq 5)
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 75340MB, 75340 cyl, 16 head, 128 sec, 512 bytes/sec, 154296320 sec total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 16 (irq 5), address 00:15:c5:f4:99:65
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 17 (irq 3), address 00:15:c5:f4:99:66
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: no mapping
for pin B (line=00)
: polling
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
cpu0: Enhanced SpeedStep disabled by BIOS
real mem = 1073053696 (1047904K)
avail mem = 970829824 (948076K)
using 4256 buffers containing 53755904 bytes (52496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/02/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev.
2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x4e00 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: irq 5
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 75340MB, 75340 cyl, 16 head, 128 sec, 512 bytes/sec, 154296320 sec total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 5,
address 00:15:c5:f4:99:65
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 3,
address 00:15:c5:f4:99:66
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 6
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 3
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0 (GENERIC) #690: Sat Sep 16 20:26:25 MDT 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073086464 (1047936K)
avail mem = 907747328 (886472K)
using 22937 buffers containing 107515904 bytes (104996K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.45 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
mpi0 at pci2 dev 8 function 0 "Symbios Logic SAS1068" rev 0x01: irq 5
scsibus0 at mpi0: 63 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct fixed
sd0: 75340MB, 75340 cyl, 16 head, 128 sec, 512 bytes/sec, 154296320 sec total
"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 5,
address 00:15:c5:f4:99:65
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 3,
address 00:15:c5:f4:99:66
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 6
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCC4244, B101> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: no mapping
for pin B (line=00)
: polling
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 536215552 (523648K)
avail mem = 447283200 (436800K)
using 13142 buffers containing 53829632 bytes (52568K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfa5c0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01E6 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.48 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 2.80GHz, 2800.11 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,M
MX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type PCI
mpbios: bus 9 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev 0x04
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev 0x04
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 2 int 16 (irq
5), address 00:15:17:15:b2:4c
em1 at pci3 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 2 int 17 (irq
3), address 00:15:17:15:b2:4d
ppb3 at pci2 dev 1 function 0 vendor "IDT", unknown product 0x8018 rev 0x04
pci4 at ppb3 bus 4
em2 at pci4 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 2 int 17 (irq
3), address 00:15:17:15:b2:4e
em3 at pci4 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 2 int 18 (irq
11), address 00:15:17:15:b2:4f
ppb4 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci6 at ppb5 bus 6
bge0 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 16 (irq 5), address 00:15:c5:f5:21:94
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb6 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci7 at ppb6 bus 7
bge1 at pci7 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2
int 17 (irq 3), address 00:15:c5:f5:21:95
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 6)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb7 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci8 at ppb7 bus 8
vga1 at pci8 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-ROM CD-224E-N, 3.AB> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 20 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA3>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: no mapping
for pin B (line=00)
: polling
iic0 at ichiic0: disabled to avoid ipmi0 interactions
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub4 at uhub3 port 3
uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2
uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302 |
